Features and description of water heaters Zanussi

Zanussi creates first-class products that make people's lives more comfortable. One of her creations is the water heater.

Electric water heater company Zanussi designed for heating cold water for domestic purposes.

It should be noted that the installation and performance check are carried out by a qualified worker who is responsible for the installation and will advise you on the operation of the water heater.

Before proceeding with the installation, make sure that the device is properly grounded for your safety.

We now turn directly to the elements of the device.Smalto, Smalto DL water heaters consist of:

• the water heater itself with a power cable;
• protective shutdown devices;
• safety valve;
• mounting anchors for mounting.

The water heater has the following positive qualities:

• water temperature is controlled automatically;
• three-level protection: from dry heating, from overheating, from excess hydraulic pressure;
• the protective coating of the tank is treated with high-quality enamel to prevent the occurrence of scale and rust;
• the heating element is flawless and safe to use, the shelf life is long enough;
• the economic mode provides heating of water to 55 ° C, prevents a scum, increases operability of the device;
• preservation of the temperature of heated water due to storage solutions in the form of dense thermal insulation;
• temperature regulator contributes to non-replaceable and reliable control of water temperature;
• the adjustment range of the heating water is from 30 ° C to 75 ° C;
• easy and convenient use and maintenance of the device.

The safety device, in turn, helps to avoid electric shocks by 100%.

When connecting the water heater, follow the instructions. When the connection to electricity has occurred, the Power indicator on the face of the safety device will illuminate.

When installing - be sure to follow safety rules! Installing the device in the bathroom, do not forget about the limitations associated with prohibited and protective volumes.

• The socket must be properly grounded. The rated current in it is not less than 10 A. To avoid a short circuit, keep the socket and plug dry. From time to time, check if the plug is firmly plugged in.
• Before installing the appliance, make sure that the wall can withstand a load that is twice the total weight of the water heater. If it is unsuitable, then it is necessary to eliminate the problem by strengthening the wall or choosing another location for the device.
• Be extremely careful when installing a safety valve: it must be located at the point of entry of water.

• During the first operation after installation it is impossible to connect the power to the full set of water in the tank. When dialing, open the hot water tap for air release. When the tank is filled, water will flow from the tap - then it can be closed.
• When water is heated from the outlet of the pressure relief valve of a safety relief valve, water can flow in - this is a natural phenomenon, so do not be intimidated. However, if there is an abundant leak, immediately inform the maintenance technician.The pressure release port should not close, because closing it will cause the device to malfunction.
• Attach a drain pipe to the pressure release port in the safety valve and put it into the sewer to drain the water.

• To avoid scalding with hot water, the temperature can be adjusted with a mixer tap.
• If the power cord is broken, replace it with a similar one that can be purchased directly from the manufacturer. Never replace the cord yourself - contact an experienced service technician!
• If any part of the water heater is damaged - call for qualified workers from the technical service.
• The device is not adapted for use by children and people with disabilities (physical and mental).

To bring you up to date and help identify problems and fix them, we offer you the following table:

Most consumers believe that this is a great boiler. This is primarily due to the fact that it heats the water in minutes. Only an hour is spent on heating to a maximum temperature of 75 degrees. In addition, reviews contain such advantages as clear control, low power consumption and beautiful appearance.

Zanussi water heaters have not so many minuses, but nevertheless they are, though not too significant. For example, the models ZWH / S 50 Symphony HD and ZWH / S 50 Symphony HD do not have a quick heating mode, and the available thermometer does not show the temperature accurately, but with a difference of 2-3 degrees.

But Zanussi ZWH / S 50 Smalto does not have an indicator showing the temperature of water heating, as well as periodically noise during operation.

You can learn how to install the water heater with your own hands by watching the video a little bit.