The subtleties of the choice of built-in shower faucets

Modern plumbing is compact and productive, which allows it to be placed in bathrooms of all sizes. Built-in mixers are devices that successfully cope with the tasks assigned to them, while their presence is almost imperceptible. The installation of built-in mixers and the long duration of their operation are associated with several important factors. Consider the nuances of the choice of embedded shower faucets.

Embedded shower system - a technology that appeared relatively recently. Little is known about her, so there is no high demand. This design has practical and rational solutions.

Using the integrated mixer offers significant advantages:

• no protruding nodes;
• do not sag hoses;
• working plate merges with the plane of the wall.

The system consists of two nodes: one unit is installed in the wall, and the top is covered with a decorative panel.

Fittings are spout and watering can. The cost for individual models can exceed a thousand dollars or more. But this is more often the exception than the rule. For typical models, the price is quite democratic. The device is practical and now in the West is in a fashion trend.

Inherent in him:

• ease of installation;
• simple functionality;
• reliability.

The main functioning node is the base unit, which is responsible for the intensity of the flow of water.

Consists of the following elements:

• durable plastic cup;
• brass head with four threaded holes.

The latter directly control the mixing of hot and cold water. The mechanism is made so that it can work for a long time without damage. It is simple, has no complicated parts, the number of nodes is minimal.Preventive maintenance of the mixer usually comes down to replacing the gaskets.

It is important to know the quality of the materials from which the mixer is made. For example, the most unreliable are products made of silumin (powdered aluminum alloy). Prices for such products are low, although buying them is not recommended (it will be wasted money). Such a thing in a short time will become unusable without the possibility of recovery. The situation is better with brass structures, which are slightly more expensive, but their strength is higher.

A good product is characterized by a coating material, the most common are:

• chromium;
• bronze;
• gilding.

It is necessary to pay attention to the functionality of the product. Often, people buy appliances that are used in 30-40% of the potential that is in them. The conclusion is clear: it makes no sense to overpay for an expensive model that you plan to use only half.It is more reasonable to purchase a unit that will best meet the needs, while it will be cheaper.

Before you install the device, you need to invite a specialist with experience to look at the room and give valuable practical advice. It is not always possible to install embedded systems without any difficulties. Sometimes it takes a fair amount of effort and considerable material costs. The shower complex has its own capabilities.

This applies to bathrooms, where there is no bidet, there is only a toilet. Intimate hygiene can only be done with such a shower. These devices work flawlessly, have a compact size.

The wall arrangement of a watering can is in noticeable demand.

It can be used in two versions at the same time:

• use of a separate compartment;
• shower for the bathroom.

The wall position of the watering can makes it possible to transform it closer to the ceiling, which meets the traditional conservative requirements.The original solution is the so-called "shower in the tropics." Its essence lies in the fact that water comes from a large panel embedded in a wall or ceiling. Water jets resemble rain in the tropics during the monsoon. Often, similar appliances in the bathroom provide additional lighting, which gives the device a more attractive appearance.

Types of mixers in which there is no outflow:

• single lever (it has a shower, holder);
• the lever in the mixer is located vertically;
• The lever is located horizontally.

The upright faucet is convenient for small bathrooms. The mixer installed in the wall is aesthetically more attractive. It does not have a spout, so it is popular with buyers. When purchasing such a thing, it is recommended to ask for a certificate confirming the quality of the product.

Closed-type faucet is used in small bathrooms. At the same time, space is significantly saved, at the same time a pleasant appearance is created. The advantage of a hidden soul is that it can be mounted, for example, in the side of the bathroom.This type of shower is not shameful to put in an expensive hotel room, small apartment.

Installing wall constructions is a more complex and multi-disciplinary task, but the positive effect will not take long.

Works can be divided into two phases:

• posting communications;
• tuning devices.

The work starts from the wall chroming, then the necessary communications are carried out and connected, which lead to the overhead ceiling crane. It is important to correctly put the eyeliner, which is responsible for the regulation of temperature. Shtabing is a laborious process associated with the generation of large amounts of dust and small fragments of concrete and plaster.

The following tools are needed:

• perforator;
• Bulgarian;

• electric drill;
• hammer;
• chisel.

Work traumatic, so you should apply protective measures.

You will need:

• glasses;
• gloves;
• good respirator.

Installation technology is simple, it can be done by any man who has ever held a hammer in his hands. If this experience is absent, it is recommended to invite experienced professionals. In the installation of each design has its own nuancesin this case, the installation of the wall panel implies that the mixer and the watering can are located in different blocks. Between them should be eyeliner.

Pipeline installation, plumbing installation is crucialIts value is difficult to diminish. The joints must be in good condition: the pipes will be in the walls for a long time, if there is a malfunction, everything will have to be done anew. The number of connections depends on the reliability of the entire system.

Pipes for connection are made of metal or copper. All contacts provide sturdy fittings. It is not recommended to buy cheap units of dubious origin. Defective fitting is the main source of accidents and leaks.

It is not necessary to make walls. In many cases it is more rational to place the communications in a box of moisture resistant drywall. This method looks more rational, economically not so expensive.

On the modern market are products of dozens of different manufacturers,an overview of which may take several pages. Positive reviews from many companies. Among the leaders can be attributed to the company Grohe. This company was founded in 1935 in Germany, mainly producing plumbing. The company is known for presenting original innovative developments to the world each year. She has been producing integrated plumbing kits for 24 years; she has a unique design center that comes up with all the new product models.

Firm Hansgrohe there is more than a century. The structure is famous for its original models, their impeccable quality. The company is a trend setter for manufacturers of the entire industry. Products combines exquisite design and excellent quality, all products are subject to long warranty periods.

Czech brand mixers Lemark appeared on the post-Soviet space relatively recently. Products represent mainly the economy segment, production facilities are located in the city of Brno. However, the range has expensive models of extra class.

There is a set of models specifically for the kitchen, shower, bidet, washbasins. The pride of the manufacturer are branded crane boxes and ceramic cartridges. The presence of special plastic covers protects your hands from burns due to high temperature.

Installation of the mixer can be done independently (the process does not require great skill). To do this, it is enough to carefully read the instructions, which are attached to each item. Strobe parameters are usually 14 cm wide, up to 10 cm deep. To begin work, you need to know exactly where the watering can will be. Using a marker, mark a line to the grooves in the wall. Then, by this markup, a groove is made.

Then, from the installation site of the main node, another line is drawn with a marker to the main watercourse. Pipes are placed in the existing recess. You should also make the nozzles for the mixer and watering can. At the end of the pipeline threads are mounted, which are fixed in the plane of the wall.All nodes must be fixed with tow and paint.

When installing the integrated mixer, certain conditions should be observed:

• When installing the built-in mixer in the wall make a major recess.
• Communication at the same time should not intersect.
• It is better to work with a perforator with a nozzle for concrete.

You can find out how to install a do-it-yourself shower faucet from the video below.