Variants of models and the device of bath mixers with long spout

Bath faucets, which include in their design a long spout - this is the version of plumbing, which can be attributed to the classic. They gained their popularity a long time ago. Thanks to modern technology, their appearance has completely changed, and inside their elements have a new execution. It is thanks to the long spout that the user has advanced use options, which is to be noted as the main advantage of this choice.

The main feature of the device is the presence of a long gander, which can be rotated. Thanks to this design, the installed faucet can be simultaneously used for both the bath and the sink.You can change the location of the water set, depending on the needs, which greatly facilitates the operation of the sink and bath.

Each model of the mixer includes in its design a flexible hose and a shower head, which is fixed on the body with the help of special supports. Some models may include mounts that can be mounted in a wall or on the bathroom itself. If there is a need to buy a faucet that will be used for the bathroom and the sink, try to acquire only high-quality models, since a large load needs the strength of all the elements of the installation.

The most popular and common material that is used to create the faucet is stainless steel. It is in the first place among the other materials, as it has the strength, aesthetics and availability. Mixers made of stainless steel, can organically fit into any style direction.

Materials such as bronze and brass have a long service life. They prefer to use in the event that the bathroom is designed under the classic style or Provence.The cost of such mixers is much higher than those made of stainless steel, but it justifies itself.

You can find pottery. They have an attractive appearance, in addition, it may be different non-standard. Before you buy this version of the mixer, pay attention to the fact that not only the price is overestimated, but also fragile, so you need to handle it very carefully.

All variety of mixers can be divided into two large types - two-valve and single-lever. Their difference lies in the control system and in the elements that help to mix water.

Today, manufacturers offer the following types of this option:

Such a mixer includes a rubber cuff or silicone gasket. The advantages of such an installation include the affordable cost, operational reliability and the ability to carry out independent repairs if necessary. Among the shortcomings, users emphasize the fact that the valve has to be turned several times to supply water, and time is needed to adjust its temperature.

This type includes several plates and holes.One is installed in the case, the other is attached to the rods. The advantages of such a mixer include the fact that it is easy to use, durable, and works silently. Among the shortcomings, the following are distinguished: overestimated cost, rapid wear of the mechanism (it depends on water quality) In addition, if a crane fails, it is almost impossible to repair it, sometimes it is easier to get a new one.

If choice is a problem, then experts recommend buying the latter type., but if the quality of water is low - first.

Increasingly, consumers prefer single lever faucets with a long spout, the hallmark of which is ease of use.

The following options of this look are presented at the market of bathroom equipment:

The name is due to the fact that inside the mixer there is a metal ball with several holes. The advantages of this choice include a long service life and high-quality sealing. As for the shortcomings, one of the main ones is considered to be excessive sensitivity to lime deposits, since they may adversely affect the operation of the device.

Such installations include special plates made of ceramics. They differ in easy management and long service life. The negative aspects include the fact that the cost of such products is high, in addition, the quality of their work depends entirely on water, which should be free of mechanical impurities.

If you consider the best options that are suitable for washing and for the bathroom, then you will certainly be interested in the universal wall-mounted single-lever mixer Oras. This faucet with a gander of 40 and 50 cm has the best qualities, it is reliable, has a long service life and is beautiful in appearance.

Thermostatic models are a novelty on the plumbing market. Due to the fact that its use is at a high level of comfort, such mixers are becoming increasingly popular.

Based on the control method, such mixers are divided into three types:

They include a screen and touch or button type controls.Among the advantages of such an installation, it is distinguished that due to electronics it is possible to control the water flow. As for the shortcomings, such a device is dependent on external electricity.

In this case, the mixer is controlled by special handles. The negative sides in these models are not noticed, they do not depend on electricity and are reliable.

The design of such a mixer with a long spout includes an infrared sensor. Experts have recognized such models as the most comfortable to use. The user can set the parameters of pressure and water temperature before switching on. Like the previous models, there were no drawbacks, and as for the advantages, the most important thing is safety. Using such a mixer, a person may not be afraid of the fact that suddenly it goes too cold or, on the contrary, hot water, the thermostat controls this indicator and the flow pressure itself, changing it in such a way that the user does not even notice.

In the production process spouts use several technologies:

1. Tubular In order to make such spouts, bend metal tubes to give the desired shape. Such products are the most popular because of their low cost. In the place where the gander connects, there is a seal - a plastic ring. An aerator is installed at the other end.
2. Soldered. In this case, create a variety of models that differ not only in appearance but also in cost. During production, the tubes are not only bent, but also inflated, in order to eventually get a product with a different diameter. At the end of such products not only an aerator is installed, but also special nuts.
3. Cast. This technology is the highest quality and most expensive. The body of the mixer is monolithic, and the weight of the structure is very large, since brass is used for production.

Faucets with long spout can be installed not only in the bathroom, but also in the kitchen. This will be a particularly advantageous solution if the sink is double, in which case a long spout will enable the use of several containers at once.

Long spouts are those whose length is more than 25 cm. This design is able to decorate any modern interior, in addition, it is economical, comfortable and versatile. Among the features of this type, it is possible to single out the fact that the faucet on the mixer can supply water in any direction, which is beneficial for sinks, bathtubs and showers.

Other advantages of a long spout include:

• Convenience in filling any containers. They do not need to keep on weight when typing water.
• No problems in the implementation of the repair.
• Such structures are designed for double load.
• Using a spout or shower, you can comfortably clean your baby.

The disadvantage of this choice will be that the mixers with a long spout have a low tightness indicator. In addition, its use will be limited if the sink is located at a great distance from the device.

In order not to be mistaken with the purchase, you need to prepare in advance, and this may help the rules and selection criteria, the basic of which are presented below:

1. If you have a small bathroom and you need a mixer for it, then the first thing you need to think about is saving space, and only then about aesthetics and functionality. In this case, it is better to give preference to the swivel type of mixer with a long spout. You can serve both the sink and the sink at the same time.
2. In that case, if the room is large enough, then the previous version is not for you. Here you can provide each plumbing mixer.
3. If you need a bath-only faucet, pay attention to its flow characteristics. The larger the diameter of the spout, the faster the capacity will be filled.
4. It is better for the bathroom to choose a spout with a length of more than 25 cm. It will not only cope with its direct responsibilities, but will also help to cope with other tasks more quickly. With it it is easier to fill a separate container with water, it is easier to wash your hair. For the sink it is better to limit the mixer to 24 cm.
5. Do not forget to take into account the overall style in the bathroom when choosing a faucet.It is better to install rectangular chrome models in modern interiors. If your interior in the bathroom is classic, then you can give preference to the long and curved versions with copper or brass color.

That is, in the buying process, the first thing to focus on is quality and usability. Only after you understand that the chosen option suits you, you can ask the seller about the presence of other models or colors to choose the product you like under the decorated bathroom interior.

To choose a mixer, see the next video.