Floor-mounted bath mixers: types and features of installation

Returning to his house or apartment, a person hopes that he will rest and relax. This may help such a simple action, like taking a bath. Therefore, choosing a high-quality, stylish and durable bathroom faucet is a very important task. Nowadays, floor faucets are becoming increasingly popular. They fit perfectly into the interior, look great in a large space. They are recommended to be set if there will be two baths in the room. And also, if the layout of the room is individual and non-standard.

Faucets are made in the form of high rack (1.5 m), equipped with a spout and have holders for towels and shower. They are installed in the floor near the bath.It is advisable to connect them to the plumbing system during the repair, and not after it. Otherwise, it is necessary to additionally hide the pipe installation in the boxes of drywall.

There are many models on the plumbing market that can be classified by type.

• Classic construction assumes the presence of two levers or valves. But it has several drawbacks: quick wear of gaskets on the valves and manual adjustment of the water pressure, which not everyone likes.
• At the mixer with one lever more benefits, as it is controlled with one hand. The main advantage of this model is that it has a ceramic cartridge. It requires regular replacement, as it is operated in hard water conditions.
• Cascade Mixers produce an effect on the buyer, but in fact they are not very practical. The mechanism that is responsible for the imitation of a waterfall can break down.

• Touchless Floor Mixer controlled by sensors. It is hygienic, because the hands do not touch the cranes. These species help reduce water consumption.
• Models with the electronic mechanism. This is a contactless faucet that can create a water mode, and not one.To him you can pick up the temperature and the desired pressure. Electronic products do not perform well in hard water.
• Combined Mixers, they are distinguished by the fact that they have an elongated swivel spout, so it is used both above the bath and above the washbasin. The mixer is creative, convenient to use, but its moving structures are subject to rapid wear.

Stand mixer hides the water supply. It is working, because at the top of the system there are spouts and taps with which you can adjust the head. After all installation work, the mixer on the rack takes 1.5 m in height. Such columns must be securely fastened. For Cezares boilers it is necessary to select individual options. You can control the mixer with one lever or two. It has protection against electric shock, as well as a mode of economical water consumption. In addition, the models have an aerator and leakage protector.

Modern plumbing is so diverse that design execution can be in styles such as "high-tech", "retro", classic or Victorian. Models in the style of "retro" are popular, they are made in bronze,outwardly, they look like antiques. For example, such a mixer would be appropriate in a classic interior design.

The coating of the mixer is glossy or matte. In the production of sanitary ware, high-grade steel is used with special protection of the product against corrosion and dirt. Chrome plating not only protects the mixer, but also gives it elegance. The surface is bronze, gold, color. Brass faucets are strong, heavy and durable.

Floor-mounted faucets can be equipped with a hand shower (Chinese brand Kanggu). This design immediately acquires several functions. The German brand Kludi has developed faucets specifically for bathtubs. They have a wall-mounted control lever that takes up little space and looks extraordinary. The Italian company Migliore offers elegant luxury in a retro style. Spouts are made with the effect of aged bronze coating. Lovers of classic style, such models will appeal to. They will occupy a worthy place in the antique interior.

With the help of mixers you can achieve the optimum water temperature. In modern mixers, there are options for maintaining temperature.You do not need to adjust the degree of heating of the water each time; everything will be adjusted automatically. Installing a floor model is not cheap, but it will quickly pay for itself. And also fits perfectly into the interior.

Before installation, you need to prepare the room, buy tools and materials. It is better to carry out the installation before finishing the room, when it is possible to hide the pipes. But if it so happened that the decision was made to put the mixer on the ready repair, then you also need drywall. From it are made boxes, which hide the pipe wiring.

Be sure to check the connecting elements for tightness. A test is performed before walling in the supply pipes. The water is turned on at full capacity, the master ensures that the fittings do not break and never leak. After testing, you can mount the stand and fix it with screws.

For proper installation, you will need the following materials:

• polypropylene pipes (PN16-25);
• soldering tool;
• cement mortar;
• gaskets for the mixer;
• fitting;
• tow or tape fum;
• eccentric.

Installation of the floor mixer usually includes the following steps:

• make two rectangular holes in the base into which the pipes must pass unhindered;
• to lay pipes with cold and hot water;
• to seal holes, whence pipes come out with cement mortar or special mixture for masonry;
• then close all the concrete screed and tiles;
• install the mixer stand with 4-6 screws that are included;
• Using an eccentric, gaskets and fittings to fix the mixer, the installation with this is exactly the same as in the case of a conventional mixer.

Installation Tips:

• installation is carried out before laying tile;
• before work it is necessary to block the water supply;
• follow instructions carefully;
• call a specialized installation team, so that all the work was done under warranty (if the installation was done incorrectly, you can lose both the mixer and the guarantee for it);
• choose high-quality components;
• always inspect the purchase for mechanical damage - in case of detection, you should abandon the purchase.

Mixers of this type have many advantages, but they also require certain investments. In the case of repair of the floor mixer will have to call a team of specialists. On the plumbing market, floor models appeared not so long ago, but they are already at the peak of popularity, because it is comfortable, stylish and beautiful.

Advantages of floor mixers are as follows:

• easy to use;
• Easily fit into any style;
• simple installation;
• mask pipes;
• available for repairs.

Floor mixers have their drawbacks:

• occupy a lot of space;
• not suitable for all bathrooms for registration;
• Both the mixers themselves and their installation and repair are expensive.

Floor faucets are better to install in the center of the bathroom, especially if you plan to use the device for the sink. It should turn in any direction. The disadvantage of this layout will be the apparent clutter of space. Floor-mounted models should fulfill their intended purpose and supply bathing water. Then all the levers will be located in the accessibility. To turn on the water, you just need to reach out.

Designers love contrasting shades: in cases with the design of a bathroom, the bath may be white, and the faucet is chrome-plated. Or red and white colors in an interior are beautifully combined. For lovers of antiques there are exclusive models made of bronze and inlaid with stones. They will favorably emphasize the taste of the owner and his status.

Floor faucets - this is one of the types of new sanitary equipment, with its own nuances in use. The most famous manufacturers are Grohe, Hansgrohe, Kludi, Miglore, Kanggu. Outdoor models look outside the box and can be installed indoors and outdoors. This is true for residents of the southern region, because they are installing a bathtub on the terrace. Do not forget that this product ideally requires a hidden connection to the plumbing system. It is recommended to be engaged in installation of mixers during capital repairs of rooms.

You will find out how to install a floor standing bath mixer in the next video.