Radomir baths: popular models

The Radomir company began its work in 1991 and is the first to be engaged in the production of hydromassage systems in Russia. For the manufacture of its products, the company applies modern production technologies, precisely complies with all technical processes, thereby achieving high quality products.

The company is developing rapidly and does not stop there. Its products have earned a huge amount of positive feedback. The range of Radomir baths includes both compact models and luxurious overall tanks. It should be noted, and a huge selection of designs and colors, thanks to which everyone can choose the most suitable bathroom interior option.

Baths are made of acrylic - it is an inorganic adhesive polymer, the characteristics of which are very similar to the properties of rubber. From acrylic make thin sheets that are heated to make the desired shape of the product. At the final stage of production, when the mold is completely frozen, the bath is reinforced with reinforcement using glass mat and polyester resin. Be sure to install a metal frame with a corrosion-resistant coating.

Radomir baths have gained immense popularity, according to some characteristics, they are not inferior to iron ones, and even to some extent better.

The advantages of products include:

• attractive and stylish design;
• resistance to water with chemical additives;
• good noise insulation;
• excellent thermal insulation - in 60 minutes the water cools down only a few degrees;

• anti-slip surface;
• wide range of;
• bacteria do not multiply on the surface of acrylic;
• minor defects on the surface can be fixed with a special polishing paste.

But besides the advantages, like any product, the baths have several drawbacks. Acrylic Radomir baths do not withstand mechanical stress.And inexpensive models without a strong frame tend to lose their original shape. Also, consumers note that the prices for these products are too high, but with proper care and operation, it can serve for more than 10 years.

Considering the architectural features of city apartments and private houses, as well as the tastes and requirements of customers, Radomir offers a variety of bathrooms in its range.

Most manufacturers offer rectangular bathtubs of various sizes. The assortment of Radomir has products with different parameters that can be installed both in huge and small bathrooms. Standard lengths are 120, 140, 150, 160, 170 and 180 cm, but there are also models of other lengths.

The dimensions of the smallest acrylic bath are 120 x 75 cm. In such a bowl you can only swim while sitting. It is suitable for bathing children or adults who are banned from strong thermal loads.

Products with dimensions of 170 x 70 and 168 x 70 are the best option for those who like to enjoy a warm bath. Such models are quite long and wide, but they are also compact.

Models such as baths 170 x 110 and 180 x 80 are suitable for bathing tall people.But designs with such parameters can be installed only in the houses of modern construction, where the area of ​​the bathroom is large.

In addition to traditional bath forms, unusual products are also available to the consumer - asymmetrical, angular and oval.

Models that have different length and width of the side. The body can be rounded, beveled or tapered at an angle. Thanks to the original form, this bath allows you to create a stylish and unusual interior. The design allows you to save space in the room, hide all defects and divide the room into zones. Installation requires a special decorative panel.

Options where the two sides connect at an angle of 90 degrees. They are installed at the junction of the walls, they can also be embedded. The outer side of the font is rounded. Such models are recommended to choose for small square-shaped rooms. Due to the fact that the corner baths are wide, it is inconvenient to wash them.

They have smooth lines and sleek shapes. Perfectly fit into any interior. They can be installed both near the wall and in the middle of the room, built into the podium or floor.

The range of the company Radomir never ceases to amaze consumers. The most popular are models Irma and Vanessawhich differ in compactness, but spaciousness. It is convenient to swim in them both for a child and for an adult. Such models without hydromassage cost about 25 thousand rubles, they can be equipped with a curtain and a decorated screen.

Classic bath "Laredo" differs in stability and long term of operation. The inner bowl is made in the traditional streamlined shape of a rectangular design. It is worth noting also the compactness and convenience. There is also a bathtub for corner installation in the company's range - Orsini.

Among the popular models are also worth noting bath "Sofia", "Modern", "Agatha", "Amelia", "Silvia", "Magi". All products have different sizes and prices, customers can choose the complete set independently, according to their requirements and wishes.

Acrylic baths "Charley" ideal for bathing pets, the company is concerned about the cleanliness of not only people but also animals.

With a wide range of models, it is quite difficult for buyers to quickly navigate and select the most appropriate one. In order not to be mistaken in their choice, it is necessary to take into account the recommendations of experts.

• The side cut must have two layers - an acrylic sheet and a reinforcement. The life of this font is more than 10 years. One layer indicates that the bath is made of cheap plastic. If the cut has three layers - plastic, acrylic and reinforcement - this means that a small amount of acrylic was used in the production, that is, the quality of such a bath is low.
• The walls must have a maximum thickness - it is easy to check the thickness, you have to knock on the wall, the sound must be deaf. But note that in the side cut the thickness of acrylic is much more than on the sides of the bath.
• The bath should not have many bends - carefully inspect the product, check that there are no areas in which water can stagnate.

• The surface of the product should be perfectly smooth and shiny. In low-cost models, the surface may have roughness and unevenness.
• For small rooms it is worth choosing rectangular models, for rooms of the average sizes angular bathtubs will approach.
• When choosing a bath, be sure to read the reviews about the model of interest to you.If most of them are negative - it is better to look at another option.

From the correct installation of the bath depends on its life. When installing plumbing, it is important to follow the correct procedure, including assembling the structure and preparing the site for its installation. Acrylic is a material that is prone to losing its shape as well as damage, so installation should be done with utmost care.

There are several options for installing the bath, one of them - mounting with mounting the support legs. This is the most common method of installation, as the legs, as a rule, are among the components. Radomir equips each model with a detailed installation scheme, which even describes such actions as twisting the legs to the bottom and adjusting their height. At the bottom of the bath there are landing points, which are marked with an individual sign. In such areas there may be just a sign, and the buyer must make a hole himself or it already exists.

Installing the bowl with the frame - this process is carried out immediately in production, it is the most reliable and safe way. Acquisition of the finished kit greatly facilitates the process of installing the bath.

There is also an installation with a homemade frame, it is used in those cases.when the purchased model needs an additional attachment that will protect it from deformation. A popular method is to install an acrylic bath on an aluminum profile, and ordinary bricks are used to give strength to the bottom.

You can use several installation methods - this method is called combined. If the bath is equipped with a frame, then experts recommend using it only for installation.

Considering consumer reviews, Radomir baths are of high quality, reliable and durable. In rare cases, customers came across a marriage that was quickly replaced by a new product.

Before proceeding with the installation, the font must be carefully inspected, and the leak tightness checked. Never wash the surface with abrasive products. To clean the hydromassage system, the panel and the curtain should be used only recommended by manufacturers means.

Rollers of guides of a glass curtain need to be greased from time to time. It is better to call for the help of specialists, they will do the work without errors, which could later lead to a system crash.

Radomir carefully monitors the quality of its products, controlling each stage of its production, which results in comfortable, high-quality, durable and attractive models.

To learn how to assemble and install an acrylic bath from Radomir, see the following video.