How to hide pipes in the bathroom: ideas and ways

To design a bathroom looked complete, you should think through all the details. Any original ideas can be spoiled due to engineering communications that are left in sight. To make the interior look attractive, many users are looking for information on how to hide the pipes in the bathroom. The article outlines the ideas and ways in which you can cope with this task.

Before you hide the pipes, you must decide with what material the event will be carried out. Choosing products based on aesthetic components is not entirely correct, as they must have other properties.

You will need to pay attention to several characteristics.

• A small mass of products. The design should not clutter a small area of ​​the room, so you should choose materials that do not require a massive frame. You can use simple slats made of wood, metal profile.

• Resistant to moisture. A bathroom is a room in which there is an increased level of humidity. The material with which the water pipes will be closed must be resistant to such conditions. You need to choose products that are not prone to deformation and moisture absorption.
• Resistance to chemicals. Household chemicals are used to maintain the sanitary condition of the rooms, so the veneering material must withstand contact with such products. For this fit decorative MDF plate, plastic panels, moisture resistant plasterboard.

To decorate the unsightly pipes, you can use plates of decorative varieties of hardboard, which are covered with melamine laminate or three-dimensional gypsum panels. The latter option is characterized by a variety of textures that realistic imitate wood, bricks, mosaic patterns.They allow not only to sew up the plumbing, but also give the room an original appearance. Before plating, make sure that the pipeline is in a safe condition.

And also should be familiar with the types of water supply.

There are three types of pipes such as:

• sewage;
• hot and cold water supply;
• heating system, heated towel rail.

Not every type of communication can be easily hidden behind the trim., even if the layout of the premises involves such events. Difficulties may lie in building codes, because they do not allow hiding pipes under plaster, which are connected with the aid of a quick-release coupling or a lock. All plug-in connections must be freely available for prompt repair of leaks. Metal pipes with cold water supply, as well as cast iron sewer blocks often form condensate,therefore, they must be concealed in such a way that there is a minimum amount of air in this area that will circulate and remove moisture. These features should be considered and on their basis to carry out the selection of material for work.

Designers are ready to offer numerous options for masking plumbing in the bathroom. Stylistic decisions may differ in their forms, functionality and types of material used. There are several of the most popular methods of masking, with which you can effectively hide the unsightly water supply.

GKL is a practical and convenient raw material that allows you to solve many issues related to the interior decoration in the home. With it, perform finishing work in rooms for any purpose, as well as create partitions.

Since there is an increased level of humidity in such rooms, moisture-proof plasterboard should be used for work. They differ from the standard material in their coverage.For these purposes, compounds with impregnated and anti-fungal ingredients are used. Externally, products can be distinguished only by their color scheme. Moisture resistant representatives are stained with green pigment. As the basis for the equipment boxes used frame made of the profile. The dimensions of the racks should be 27x60 mm, the guides have the parameters of 26x27 mm. Creating a box, you need to start with the installation of the supporting structure of the metal profile, after which sheets of gypsum boards can be attached to it.

Creating a decorative box consists of step-by-step actions.

• Marking on the floor and walls should be done. To do this, find on the vertically located communications the most bulging point and, departing from it by 3-5 cm, draw a line. Horizontal marking is carried out on a similar principle.
• Along the marked lines are fixed slats. For fixing it is necessary to use dowels.
• To the rails will need to attach the profile cross. You need to connect components with special crabs. The placement pitch should be 15–20 cm.

• A special tape is used as depreciation.It should be located in areas where the frame is adjacent to the pipeline.
• The cladding of the frame is carried out with the help of drywall strips. During installation, you should ensure that the front part was on the front.
• The self-tapping screws are made in such a way that the cap sinks by 1 mm.

• In any box must be located door. To create it will need to make a hole. To make it invisible, the door must be hinged and trimmed with the entire structure with finishing material.
• The top layer of the box is rubbed over and plastered. All seams should be carefully sealed.
• It is recommended to equip corners of the box with additional stiffening ribs in order to increase structural strength.

The choice of finishing for this design is based on the stylistic component of the interior. For such purposes, suitable decoration with ceramic tiles, paint material or simple wallpaper. Skilled craftsmen advise using latex paints, as they are not prone to fading and have a high degree of resistance to moisture. If the created box will be used to close the heatingsystems or pipes with hot water supply, you will need to create a few holes in the upper area of ​​the structure. They will allow warm air masses to fall into the room.

This event has similarities with the plating of the pipeline with the help of GKL. However, decorating with such material is accompanied by massive labor costs. Tiled box has the advantage of being attractive and resistant to moisture. It harmoniously fits into the design of the bathroom and provides additional space for storing various trifles.

To remove the riser behind the tiled box, you need to prepare the frame. It can be made of wood or metal. When working with wooden components, masters recommend treating them with water-repellent impregnation. To simplify the construction process and protect yourself from possible mistakes, you need to draw a blueprint for the future structure. The sketch should display the dimensions of the elements and fastening zones.

The creation process consists of the following actions:

• first of all, it is necessary to measure the area in which the water supply system and sewerage pass;
• After that, you can proceed to the construction of the frame. Fixed construction to the walls, ceiling and floor;
• the covering is carried out by means of plywood, steady against moisture, or a chipboard;

• on the front of the building is a special hole for the hatch;
• plywood sheets and chipboard, as well as a technical hatch should be pasted over with reinforcing mesh;
• Now you can proceed to the tiled masonry;
• interglacial joints are rubbed and processed with antifungal composition.

The shape of the box will depend on the type of pipeline installation. Some users create a structure that hides not only the pipeline system, but also the sewage system. When choosing such a solution, you can use modern built-in cisterns. In many apartments can be found boxes, which are derived to the level of the sink. Using this method, you can hide unattractive pipes, as well as create additional space for storing household chemicals and household items. To hide a technical hatch, a plastic door is suitable, which is sold in any hardware store.

Blinds are considered the best way that allows you to hide the pipes at the same time and leave them in the public domain. To use the valve or to check the meter readings, you need to raise the curtains, thereby obtaining full access to the necessary equipment. In the bathroom should choose the mechanisms with plastic or aluminum blinds. Such products have good resistance to moisture. They are in demand because they do not take away the free space of the premises. Often they are purchased for use in small rooms.

If the embossed opening has a small width that does not exceed 0.5 meters, you will need a system with a lace mechanism. For wider spans, structures with a spring structure will be optimal. When installing a motorized system with electroeaves, you will need to place the product so that the motor is in a sealed enclosure. In the role of supports, you can use a plasterboard, a plastic box or a false wall.

Blinds can be installed using the following methods:

• the location of the box inside;
• installation of facilities outside.

The first option is used with the possibility of equipment niche openings with appropriate depth. The external location is used if the communication pipes are located next to the span. Uninterrupted operation of blinds is guaranteed if the opening has the correct geometric lines. This indicator is a parallel arrangement of the vertical and horizontal planes. Even a small bias can interfere with the design to move along the rails, making it difficult to use blinds. To avoid this situation, you can use the alignment of the walls or through the box.

Installing pipes into the wall is the most difficult task. However, it can not only hide communications, but also increase the area of ​​the room. When choosing such a method, it should be taken into account that, according to SNiP, it is impossible to build a brick wall or thin-walled partitions in panel buildings. The radial method has a significant drawback, which is the lack of quick access to the pipes.In the case of a leak, the situation cannot be quickly arrested; therefore, it is required to work out in detail all the measures to minimize leaks.

To do this, follow these rules:

• there should be no detachable joints in the walls;

• for laying the pipeline it is recommended to use polypropylene products;
• grooves are equipped with foam or thermoflex sleeves. Such a solution eliminates cold pipes from condensation and allows communications with hot water to expand due to temperature.

There are several simple ways you can successfully hide the pipes.

• Mosaic. This option is classified as exclusive. A wide choice of color solutions and textures is available to users, so you can create an individual design. When choosing this method, you need to consider that it is suitable for decoration only a wide pipeline.

• The use of stucco and polyurethane tubes. This method is suitable for lovers of the aristocratic style. Lightweight material does not need special installation, and a wide range allows you to decorate a room in any direction.Stucco is a versatile product that is easily removed when a leak occurs. Most users use the material to hide a vertical pipeline.

• Metal grill. Chrome-plated products are able to decorate a modern bathroom and look harmonious with sanitary fittings. Installation is made on a metal frame or on the pipes themselves.
• False wall. This is an elegant and inconspicuous solution with which you can decorate pipes in the bathroom. They are able to simultaneously hide several pipes, which attract the attention of the majority of apartment owners and houses. However, using this method, the floor space will be significantly reduced.

If communications in the apartment are not displayed in a separate shaft, the use of a plastic box will be suitable for decoration. A competent approach will ensure perfect hiding of vertical pipes with plastic, which will be discreetly decorated for the color scheme and the texture of the walls in the bathroom. Professionals recommend using a protective screen for decorating vertical pipes, which is made of plastic, PVC or HL.The framework gathers from a galvanized profile. If you want to hide not only the water supply system, but also the heating system with sewage system, it will be necessary to provide insulation and sound insulation.

Also, vertical pipes in the bathroom can be hidden behind the cabinet.

To create it will require the following steps:

• selection of the cabinet in accordance with the required dimensions;
• fastening on the wall frame and hinges;
• creating holes for pipes on the upper and lower side of the product;
• fixing the cabinet on the frame or hinged.

You can hide horizontal communication behind the box, which is created using plastic panels, sheets of plywood or chipboard. To make such a structure, you will need to mark on the opposite walls. In determining the length of the indent, you need to rely on the location of the most prominent point in the plumbing system. Guides are fixed along the marking line. For fixing, you can use screws. Jumpers are inserted into the profile, the spacing of which is 60 cm.

On the finished frame have chopped sheets HL or plywood, chipboard. If you wish, you can create a removable box. This will require cutting boards based on the height and width of the pipes. They will be located vertically and horizontally at a perpendicular angle. The assembled product is installed above the pipes.

Anyone can create a box in the bathroom with their own hands. Many users choose to assemble plastic panels, with the help of which they get the original decorative option to hide communications.

Also, a plastic box has the following advantages:

• plastic panels are in demand because of their simplicity and affordability. On sale there is a wide range of products in different colors and designs, due to which the design can be made in any style;
• the box of plastic panels is interchangeable. Any part can be easily removed, which is convenient if necessary in a partial analysis;

• for such a box does not require additional decoration. Plastic panels belong to the category of finishing materials, have high decorative properties;
• the construction is resistant to deformation and is quickly repaired. However, plastic has sufficient flexibility and durability, so it is quite difficult to damage it;
• installation of the support frame and plastic is possible even for a beginner who has not previously been involved in construction and repair. The box can be made in one day, this will require the tools at hand;

• the design has an affordable cost if compared with ceramic tiles and plasterboard;
• the box is compact and spacious. Products have a small thickness, so they do not need a massive frame. For this reason, the box will occupy a small area.

The only minus of plastic is its low level of fire resistance. Despite the fact that many manufacturers claim the ability of products to self-extinguish, the material is afraid of smoke. Therefore, it is not recommended to smoke in rooms where there is a plastic finish.

To create a decorative plastic box yourself, you must perform several steps.

• If steel pipes are installed in the bathroom, they will need to be prepared before building walls.For this, communications are cleared of old paint and covered with a new layer of coating.
• Then you can start drawing up the markup. It will be necessary to note the contour of the side and vertical walls. To do this, use a plumb with a level.

• By marking should be fixed guides. They are fixed with dowels.
• Then you can begin to install the rack profile, which is mounted on the rails at the expense of screws.
• To strengthen the structure, you should put the crossbar. They will provide lateral stability.

Now you can begin the process of plating. To do this, you will need to start panels in the bar, stringing them row by row. Each plate is adjusted to the required size in advance. Panels as much as possible move in levels and are fixed by self-tapping screws. When joining the panels together, ensure that the locking mechanism is tight. The final step is to install an external molding. Similar strips trim the joints of the frame part with the ceiling and the floor.

To properly hide the pipes in the bathroom, you need to familiarize yourself with the key rules of the process. Before you hide the communications, you need to consider the design of the future decor so that the pipes have access. Counters, as well as threaded connections should be "on hand". Knowing the rules, you can avoid mistakes and shorten the repair period.

Experts recommend using the following recommendations:

• make sure the proper functioning of the communications. Many people forget to provide a sewer pipe when they are closed behind the box;

• when plumbing or sewer pipes are hidden, it is necessary to provide access to the taps. To do this, equip the inspection hatch in the box;
• threaded connections are the weakest points of pipes. Therefore, you need to monitor the tightness of the joints, the condition of the used seal. And also you need to make sanitary hatches that will allow for repairs in the formation of leaks;
• before you close the communication, you should decide on the location of household appliances.If we neglect this procedure, in the future it may be difficult to bring new equipment.

Many errors can be avoided if the work will use materials only of high quality. And also accuracy is important during repair actions. Neglect of these rules will lead to the fact that in the future there will be leaks, which will entail the analysis of the box and costly repairs.

To learn how to make a box in the bathroom in 30 minutes, see the next video.