How to remove paint from the wall in the bathroom?

If you decide to re-equip the bathroom with a Soviet-era renovation, then you will definitely encounter the problem of removing old paint. To remove dried enamel, a variety of different techniques are used, differing in complexity, efficiency, duration and tool kit.

Today, professionals from the field of repair use inventive techniques to remove the paint, which has been kept on the wall for several decades.To achieve the desired effect, the following tools are used: a burner, spatulas, knives, axes, grinders, and more.

The process of cleaning old paint is laborious and time consuming. While working in the room accumulates a lot of dust and debris. Consider the health risks of toxic components in the paint. Complicates the work of unpleasant odor and significantly limited bathroom space.

Before choosing the optimal cleaning method, you need to accurately determine the following aspects:

• material opportunities;
• availability of special tools (in the event that you are going to carry out the work yourself, without the involvement of specialists);
• composition of old paint;
• enamel layer thickness;
• base (concrete wall is considered the most difficult to clean, especially if it is necessary to work with oil paint).

Be sure to consider the density of the material from which the wall is made. Some effective techniques can cause severe damage to the substrate.

You can peel the paint off the wall by resorting to mechanical methods. For work, you will definitely need various tools: both electric and manual.

During overhaul without spatulas can not do. Using this tool, you can completely clean the room from the old paint, but remember that this is a very time-consuming method, which will take a lot of time. Among the advantages - accessibility, minimal noise during operation. A huge amount of dust, as when working with electric tools, is not collected.

With the help of a spatula you can reach inaccessible places. Professional skills are not required, so the method is great for beginners.

To clean the walls in the bathroom faster, you can use a small ax with a sharpened blade.Compared with the above option, the noise in the process will be much more, but the effort will need less due to increased performance.

First, on the painted surface leave notches located close to each other. The greater their number, the easier it will be to take place the subsequent removal. After the enamel is removed from top to bottom. Work carefully and slowly. In this case, the force of the blow with an ax is not decisive.

The technique is more advantageous in comparison with the use of electrical devices due to less generation of dust and debris particles. For this procedure, you need great endurance and physical strength, as well as experience with the tool. The method is recommended to apply on plastered bases.

Instead of an ax, you can use a bricklayer pickaxe. Working with it is easier and safer, and the level of efficiency is the same as that of an ax. The disadvantage of this method is that not everyone has such a tool, but it is not difficult to find it in any specialized store.

Using a power tool will help you quickly and efficiently remove paint.Among the large selection of special equipment most often used grinding machine with a diamond cutter. As well as masters make a choice in favor of the impeller and the cutting wheel for concrete. Often in the work used perforator and grinder.

This is one of the most effective methods for cleaning a concrete wall. Be sure to adhere to safety rules when working with power tools. Protect the respiratory tract respirators, as well as get special clothes and accessories: gloves, glasses and more.

Various chemical compounds also demonstrate high efficiency in their work. The modern market offers a huge variety of solvents.The composition is applied to the paint with a brush or roller. It is left for a certain period of time for the desired effect.

Soft enamel is removed with a spatula. Most often, workers choose the well-known acetone or “White spirit” composition. Popular soda ash and "liquid" glass.

Organic solvent solvents have proven to be effective and affordable; however when using them, you must be familiar with some of the features.

• Respiratory protection required. Volatile toxic substances adversely affect health.

• It is necessary to process each paint coat with solvent.

• Improper use of the composition may affect the subsequent application of the coloring composition.

• Carry out work in a well-ventilated area. The standard bathroom of a multistory building has no windows, so the doors must be open. If necessary, place the fans in the room.

• During work in the house should not be children, pregnant women and animals.

• Dispose of the remaining composition under strict instructions.

Of chemical methods for removing paint, the use of inorganic components is also common. This is quicklime or soda ash. The necessary mixture is easy to prepare at home: 400 grams of soda is mixed with 1.4 kilograms of lime. Before applying the composition is stirred with the addition of water. The consistency of the composition should resemble a thick cream. The resulting mixture is applied to the wall and left for about 12 hours. After that, it is effortlessly removed with additional tools, such as a spatula.

Old enamel is also removed with a layer of "liquid" glass. As soon as the composition dries, it is removed along with particles of the old coating. Despite the effectiveness of modern inorganic solvents, be patient. The process has its own characteristics and nuances.

Water-based enamel is called water-based. Due to a number of technical and operational features, it is often chosen when decorating residential premises.Despite the fact that the composition is based on ordinary water, it is almost impossible to remove the old coating with the help of special liquids. Due to the high stability and wear resistance of enamel retains the structure even under the influence of aggressive components.

Specialists made a number of recommendations to which It is recommended to listen before removing the layer of water-based paint.

• Moisten the wall with warm water before starting. Use a large roller. Moisture and temperature will make the enamel more elastic and soft. Carefully moistened surface is left for a while, so that the layer of paint starts to swell. Completes the removal process with a spatula. This is a convenient and safe method for cleaning the ceiling, since in this case cleaning with electric tools is difficult, inconvenient and even dangerous.

• In the drying process, the cleaning efficiency is reduced. Always maintain the necessary moisture. In this case, the work will be easier and faster.

• To avoid staining the floor when removing it, cover it with a film, newspaper or thick cloth.

• If the desired result is not achieved, use a grinder. The tool will do a great job, but after applying the room will be covered with a layer of dust. Be sure to use protective clothing and accessories.

Each master uses one or another method of removal depending on various factors: the composition of the paint, the size of the room, the timing of the work and much more. At the same time a lot of handy methods of enamel removal were developed. They are sure to come in handy if you do not have the necessary composition or tool at hand. Let us dwell on the most effective and popular methods.

• Iodine. The well-known chemical element is used not only in the medical, but also in the construction field. The solution based on this component has established itself as an effective softener. It can be easily prepared at home by dissolving 200 milliliters of iodine in a bucket of water.

• Shredder The above tool can be purchased at the hardware store. It is prepared according to the attached instructions.Such a process does not require significant physical effort, but will take a lot of time. The composition is applied to the wall and wait until the paint becomes loose and soft. Then it is removed mechanically.

• Soap. Soap solution will help reduce the time and effort spent on removing old paint. Thick and fluffy foam copes well with the role of softener. After prolonged exposure of the composition to the enamel, it can be removed with a regular cloth.

• Thermo. Thermal method of burning is used very rarely due to the high danger. Most masters completely abandoned this technique altogether. In addition to fire hazard, toxic elements are released during the combustion process.

In the next video you will clearly see how to remove the old paint from the concrete wall.