Washing machine under the sink: options sets

The most ergonomic location of the washing machine in the bathroom or in the kitchen, where there is access to sewage and plumbing. But often the space in the room is not enough. And then there is a need to "enter" this technique in a limited space, for example, put under the sink.

The decision to place the machine under the sink is often dictated by a small number of square meters or the desire for minimalism in the interior. One way or another, but under the sink equipment with standard dimensions can not be put.

It must be special and meet several criteria.

• Match in height. Not only fit into the distance between the floor and the sink, but at the same time there should be a small gap. The optimal height of the unit is up to 70 cm.The only exception can be made by devices that are mounted under the tabletop. Their acceptable height reaches 85 cm.
• The narrow and small washing machine is ideal for such an installation. The unit should not stand close to the wall, as usually the typewriter leaves room for the installation of a siphon and pipes.
• The width of the device should be less than the width of the shell. The wash basin must “cover” the machine and thus protect it from the possible ingress of excess water droplets.

In total there are three options for the placement of small machines.

• Ready set with the car which is built in under a sink. And with all the accessories supplied.
• Separate device that adapts to the sink. All components of the kit are purchased separately.
• The washing machine is built into the sink with a tabletop. In this case, the unit is located on the side of the sink.

The best solution is to buy a ready-made set, because you do not need to travel around the city in search of parts that fit each other.

The most popular complete washing machines are two models.

• Candy aquamatic complete with sink "Pilot 50". Height is 69.5 cm, depth - 51 cm, width - 43 cm.There are five models of this typewriter. They differ in the speed of rotation of the drum in the spin mode. All of them are budget options. They can wash up to 3.5 kg of linen;
• Eurosoba Included with the sink "messenger" has dimensions 68x46x45 cm. This is a very popular model. The program provides auto weighing. The manufacturer confirms the high quality of long service life and warranty.

It is noteworthy that washing machines under the sink are made only for the Russian segment, often the assembly of equipment is made in the Russian Federation. Bosch, Zanussi, Electrolux, Candy, Eurosoba - these are the manufacturers of equipment, in the model range of which you can find machines for installation under the sink.

In the stores of household appliances there are compact washing machines.

• Zanussi FCS 825 S. The height of the product is 67 cm, width - 50 cm, depth - 55 cm. Due to its dimensions, a standard siphon can be installed under such a device. True, the machine is inferior in performance: the rotation speed of the drum is a maximum of 800 revolutions, and the maximum load is 3 kg. The output will be slightly damp underwear, but it is rather quiet.
• Zanussi FCS1020 has the same characteristics as the above model, but only the speed of rotation is higher and is 1000. Both cars are budget.

• Electrolux. In the model range of machines there are two options with the parameters of 67x51.5x49.5 cm - this is EWC1150 and EWC1350. They differ in the maximum speed of revolutions per minute. They are reliable and economical, but not the cheapest. Their capacity is 3 kg.
• Candy Aquamatic series includes five machines with dimensions of 69.5x51x43 cm. They have different spin speeds (from 800 to 1100 revolutions per minute).
• Eurosoba model range distinguished by reliability. Product warranty is 14 years.

To these devices will need to purchase a special sink. It should not be very deep. Most often, to install a washing machine under the sink, they buy a “lily” type sink and a nonstandard siphon, and also make a horizontal type drain. Sometimes, for example, if the sink is installed very high, then apply the standard siphon and vertical drain.

It should be noted that the washing machine can be installed under the sink with a tabletop. Such sets allow you to install a standard (more practical) siphon, a vertical drain system and thereby protect the device from possible water ingress. In addition, due to the fact that the sink is located on the side of the countertop, it is possible to “steal” 10–15 cm. And the height of a household appliance may already be 80–85 cm.

On the plumbing market are models of washing machines that fit perfectly under the sink with a tabletop.

• Bosch WLG 24260 OE. The height of the model is 85 cm, width - 60 cm, depth - 40 cm. It has a large capacity (up to 5 kg), as well as a good choice of programs (14 pieces). In addition, the machine provides an anti-vibration program.
• Bosch WLG 20265 OE has the same parameters as the model Bosch WLG 24260 OE. Unit loading up to 3 kg.
• Candy CS3Y 1051 DS1-07. The height of the equipment is 85 cm, width - 60 cm, and depth - 35 cm. This is a budget model with a capacity of up to 5 kg. She has 16 wash programs. According to the manufacturer, an anti-vibration program is installed in the car.
• LG F12U2HDS5 represented by parameters 85x60x45 cm. Model capacity reaches 7 kg. This option is quite expensive, because it has 14 washing programs and vibration control.

• LG E10B8SD0 has a height of 85 cm, a width of 60 cm, a depth of 36 cm. The capacity of the equipment is 4 kg.
• Siemens WS12T440OE. This model is represented by dimensions 84.8x59.8x44.6 cm. Its main advantage lies in the silent mode.
• Indesit EWUC 4105. This option has a small depth, which is only 33 cm.Other parameters are standard - 85 cm in height and 60 cm in width. Maximum load is 4 kg.
• Hoover DXOC34 26C3 / 2-07. Despite the depth of the unit is only 34 cm, up to 6 kg of linen can be loaded into it. There are 16 washing programs available.

Machines under the sink are compact. They are able to organically fit into a small, limited space, and in a fairly spacious room. The main advantage of such structures is, above all, their compactness and laconic appearance.

However, a fat plus in the form of non-standard dimensions can turn into the following disadvantages:

• Because of the design features, it is necessary to bend low, which is very problematic for people with a sore back;
• Built-in devices vibrate more, that is, the vibration from them is more noticeable. When the machine is securely fixed to the top (sink or countertop), the vibrations are damped, but during the spin cycle the washing machine begins to rattle and knock. And besides, because of this mode, bearings fail faster. It should be noted that washing machines with an already built-in sink do not produce loud noises and the bearings work longer in them;

• Horizontal discharge and non-standard siphon are clogged more often.As well as leaks are possible, wastewater can escape through the sink;
• Quite limited access to hidden plumbing. To “get close” and eliminate the defect can be difficult;
• If the machine is bought not in a complete set with a sink, then it will be necessary to buy a wash basin, a siphon and other components in completely different stores;
• There is a chance, albeit a small, unexpected short circuit due to water entering the device.

Choosing a machine under the sink, you should pay attention not only to its size, but also how to install plumbing, as well as the functionality of the device, the number and quality of installed programs. Despite the small load, a small washing machine may well be a family of 2-3 people. Based on this, you can keep an eye on a typewriter with “family” functions, which have many washing programs, including those that allow you to wash out very complex stains, as well as with protection from curious children's hands.

The material from which the internal parts are made, especially the drum, can tell how long the equipment should last. Preference is given to metal structures. A big plus in the choice of technology is a big guarantee from the manufacturer.

Criteria for selecting a sink should also not be limited in size. An important aspect, where and how the water will go. The type of siphon installation depends on this. The best option is to have a drain device closer to the wall or in the corner. In the form of water lilies can be rectangular, rounded. This parameter is selected individually, the choice depends on personal preferences.

The depth of the washing machine depends on the parameters of the sink. If the sink sink is 50 cm wide, the depth of the appliance is 36 cm. When the sink is wider, for example, 60 cm, then the depth may already be 50 cm.

A preliminary step before installing the equipment will be to collect data for future work. It will be necessary to make all measurements and markup. It will be necessary to go to the store and purchase either a complete set, or first a machine, and then a sink. After all, the sink will have to protrude about 4 cm above the apparatus.

Measurements will help to imagine what the finished set will look like in practice.And besides, there are some rules that are undesirable to break. So, the siphon should be placed 60 cm above the floor. Drainage should not be installed above the machine. When all measurements and markings have been made, all the parts of the kit have been purchased, you can proceed directly to the installation of the sink. When using a siphon for the sink under the washing machine, you need to install a check valve in the outlet for drainage, and fix the hose itself with hose clamps. Drain pipes are best placed at some distance from the machine.

When the installation of the sink comes to an end, you can go to the siphon. All fittings need to be lubricated with silicone. Secure the drain hose with the siphon pipe using a hose clamp. Secure the siphon pipe to the pipe. Use a sealant to seal gaskets. The main thing that the siphon was installed above the holes of the sewer pipe. Next, you can proceed to the installation of technology. Adjust the position of the machine with its feet. Consistently connect all communications. When installing the machine should be strictly follow the instructions.

A washing machine under the sink is almost no different from conventional appliances, except for the size and sometimes a limited number of programs and spin speeds.

Therefore, it should be operated in exactly the same way as other machines, care for it will be the same.

• It is necessary to maintain cleanliness and order, both outside and inside the unit.
• Each time after washing it will be useful to have the following procedure: wipe all rubber cuffs, sunroof and drum first with a wet and then with a dry cloth. After leaving the door of the machine open for airing.

• Care should be taken to ensure that no foreign objects that so often accumulate in their pockets fall into the machine.
• If the water is hard, then it is logical to use special tools that would soften it. And also in no case can not use detergents (powders, bleaches) not intended for the machine automatic.
• If a non-standard siphon and a horizontal drain are installed, it is necessary to clean the pipes more often.

A washing machine under the sink will help to organize a practical and stylish space. It will become an integral device that will significantly simplify life.And at the same time, it will not interfere with the passage, and compactly located under the sink. Modern models of washing machines are reliable and loyal assistants who will serve more than one year.

For the sets consisting of a washing machine and a sink, see the following video.