Bathroom Sink Sizes

The correct choice of the sink can be called one of the central nuances in the interior of the bathroom. An experienced designer is always trying to combine various functions using one piece of furniture. In this case, these are the functions of a washstand, countertop and storage place for detergents. At the same time, the useful area of ​​the bathroom is significantly saved.

The usual form variations for all models of washstands are square, rectangle, oval, circle and triangle. The first and most important selection criterion will be the availability of free space in the bathroom. Most often, buyers choose the oval and rectangular shape of the bowl of the sink.

By type of sink, washbasin can be classified as:

• suspension;
• round;
• on a pedestal;
• overhead;
• countertop;
• built in top / bottom;
• double;
• water dispenser;
• oval (the so-called "toothless");
• rectangular;
• economy;
• premium

The issue of selection of the size of the sink in the bathroom in the implementation of the repair is always relevant. The richest selection of various plumbing products from various manufacturers gives plenty of imagination. But the selection process should begin with determining the required size of the bowl.

The initial stage is the measurement of free space. Receive information in different ways, either by measuring the room with a tape measure, or by looking into the documentation. After that, they make a preliminary scheme, which shows how the sink will be located in the bathroom.

It should be borne in mind that during the cleaning will need a little more free space than with standard use of the bathroom. All this will help you in choosing the approximate dimensions of the sink and thinking through its location in the bathroom.

Sinks wash basins are usually classified based on their size:

• compact mini-sink, which is suitable for small bathrooms;
• sink with standard size and configuration;
• other versions of washbasins, which are a washstand for two persons or a variant combined with different pedestals;
• models with individual types of design that are made according to personal customer requirements.

When choosing the location of the sink, you should consider it:

• width;
• height from the floor;
• bowl depth.

Only the sink can be made even wider for simultaneous use by two or more people. With sufficient bathroom space for the use of plumbing of this size, there is a very real chance to place a large cabinet below. Double sinks are made up to one and a half meters wide.

When self-selecting and installing the sink (especially with a pedestal), one should not forget that access to the installation sites of water meters, filters and communications should not be blocked.One of the ways to prevent such a situation is the absence of the back wall of the bollard.

Before you visit the distribution network in order to purchase plumbing, you must first calculate the parameters of the bathroom section, which will be occupied by a washbasin. Unfortunately, the sellers do not in all cases indicate the actual sizes of the products. Therefore, you need to record the necessary parameters with precisely measured width, height and depth of the bathroom niches. This greatly helps to understand how much free space will remain after installing the sink. Such an idea is to take advantage of the owners of bathrooms of small footage.

The optimal width of the sink - from 40 to 70 cm. Large width will only reduce the usable area in a small bathroom.If one person does not need such a large washbasin, then for a large family in the bathroom, you can arrange an original sink that has a large size and a considerable length.

Accordingly, a bathroom of a small area is usually completed with small sinks no wider than 45-60 cm. Such devices are more suitable for small office toilet rooms, since at home they are installed only when absolutely necessary - due to lack of space. Due to the shallow depth of the sink, splashing of the falling stream of water will necessitate frequent cleaning.

The most convenient sink depth for optimally comfortable use is 60 - 65 cm. The reason for this choice is the peculiarities of the anatomical structure of those who will use the device. The easiest way to determine the appropriate parameters is to use the length of your own hand. Pull it over the sink in the bathroom. If its opposite edge is at the level of the palm or the tip of the middle finger, the depth of the sink is all right.

The height of the washbasin is the distance from the floor to the top of the appliance. The height of the washbasin above the floor is adjusted depending on the model. When choosing a wall-mounted washbasin, this is the simplest action, as it is installed on the walls. A person of average height will most conveniently use a washbasin located at a height of 70 to 90 cm. It is believed that men of medium height are most suitable ceramic washbasin 90-100 cm, for small people should have a sink below - 85-90 cm.

In less frequent cases, users find out during operation that they need a washbasin located at a higher or lower level.

If you plan to mount the sink over the washing machine, the level of installation of the sink should be chosen to exceed the height of the machine itself.

Washstand sink can be made of different materials: ceramics, metal, natural, or artificial stone. Ceramics are used more often for sanitary products, because they are durable, pollute little, do not emit an unpleasant echo when typing water. Shells are also popular for which material is artificial stone - they have a smaller mass.

Many factors influence the choice of the sink buyer. Some are interested in how functional the sink will be, others are interested in its completeness, color, material, shape of the sink. Still others are interested in the popularity of the manufacturer. The fourth may specifically need an unusual design, and they are not interested in anything except that the wash basin will amaze with its original appearance.

A simple buyer will most likely be concerned primarily with the functionality of the shell. Responsible for its operation are all openings that have been provided by the manufacturer.

These are openings of discharge, a modulation, for installation of the mixer, various fixing cuts.Of course, the drain is provided by all manufacturers, but protection from overflow of water over the edge of the sink, so as not to flood the neighbors from the bottom, is not provided by every manufacturer.

"Overflow" is called one or more holes, which are located on the side wall. Its function is not to allow excess water to fall on the floor if the bowl is full to the brim, but to direct them to the sewer.

The presence of additional components to the washbasin (protective mesh for drain holes, overflow plugs, siphons, fasteners, plastic, or rubber gaskets) takes place among reputable manufacturers. This addition of devices is made to simplify the process as much as possible so that you do not have to spend time on a second visit to the trading network.

In small bathrooms, it is customary to save money due to the lack of free space - in the sink in 99% of cases they put a bollard.

The corner version of the shell is usually small.but it saves free space, has a very stylish look and is comfortable to use. If you plan to place under the sink cabinets, it makes sense to make it hinged. This will make it easier to clean in an inaccessible corner.

The nuances of the design execution of washstands are also quite important, since beauty and singularity can more than be “compensated” by the inconvenience of their operation and installation. At least, before purchasing such an option, it is always advised to take all sizes very carefully.

In turn, the asymmetry of the ergonomic shape of the sink is popular if it is used in a bathroom of a small area. If you choose a sink and bath in the shape of irregular ovals with one narrowed end, this is used to your advantage. Such a not very long washbasin sink will protrude with its narrowed edge over the narrowed side of the bathtub, which will save quite a lot of free space.

Much more practical would be to adapt for him a low bench, which will serve as a stand for the baby. It will also be useful to nail rubber anti-slip pads to the feet for safety.

In our country, it has been decided that the owner of the apartment makes decisions about the location and installation of sanitary equipment on their own, building codes relating to the size of bathrooms or toilets and the distances from one sanitary element to another exist.

We give examples of the most common dimensions of the premises.

• For buildings that are used for living and social needs, the height and length of the bathroom in the plan should not be less than 0.80 m by 1.20 m. The ceiling should not be less than 2.50 m.
• Swing toilet door should be hung only in such a way that it opens to the outside.
• For a combined bathroom, where it is often installed, in addition to the most necessary sanitary equipment, there are also shower cabins, bidets and other devices, it is necessary to comply with the following standards:

• leave at least 80 cm of space from the bathroom or shower to any other object of the bathroom;
• not less than 25 cm from the edge of the toilet to the bidet;
• not less than 60 cm of free space in front of the toilet;
• at least 30 cm free space on each side of the toilet bowl;
• at least 50 cm free space from the front edge of the washbasin to any other stationary bathroom facility;

Such standards are valid for the entire territory of the Russian Federation, they must be taken into account when independently planning and installing home plumbing, including washbasins. In particular, much help can be learned from them when choosing the size of a sink long before going to the store. Also, compliance with these standards will help if there is a need to agree on redevelopment in government agencies.

If the family has a person with disabilities, you will need to be guided by several other building codes.

• The width of the bathroom should not be 1.65 m.
• The length (depth) of the bathroom should be 1.80 m or more.
• In the presence of a combined bathroom and its length and width should be 2.20 m or more.
• Such bathrooms should be equipped with special handrails for baths.

You can choose an interesting design for sinks of any size to emphasize the special dimensions of the device and the uniqueness of your interior.

In choosing the right option, it is recommended to rely on interesting washroom designs created by designers.

• A small sink can be made in the form of a bowl, located directly on the cabinet.
• More dimensional bowls can have strict forms, while the table top can be beautifully illuminated with lighting.
• A large hanging sink can have soft and smooth features. In combination with a matte shade this design will be the highlight of your bathroom.

How to choose a sink for the bathroom, see the video below.