Country wash basins with heated water: features and benefits

Modern man used to enjoy all the benefits of civilization. This rule should apply to cottages, where there is often no hot water. In this case, a great solution to the problem are country wash basins with heating. Consider their features, get acquainted with the advantages and disadvantages, find out the variety and understand the intricacies of buying a quality model.

The main difference between units with a water heater is the ability to supply hot water for human needs. The principle of operation of such washstands resembles an ordinary boiler.The design is a small pedestal of human height. On top of the device is a tank that is filled with water. It is a heating element (power unit), which operates by connecting to the network through the cord.

Under the sink stands there is a container for collecting used water (usually a bucket). If possible, the pipe can be brought directly from the sink to the sump. For this reason, some models do not provide a sump. Such constructions are trying to acquire in the event that at the cottage summed up all the necessary communications. A country wash basin with heated water usually has average dimensions. Tank capacity varies in the range of 10-20 liters. Water is poured into the tank through the top cover. The heating element is nothing else than a conventional heating element with a mechanical thermostat. It keeps the water hot.

Country wash basins with heating of water are useful acquisition. They are made from high quality raw materials. Often, to improve the quality and performance of materials combine with each other.

Products differ in color design. In the lines there is always a practical option that is suitable for each customer. Installing most models is simple and does not require mounting a complex plumbing system. The design is diverse, you can choose options with thread, ornament, grids.

Benefits:

• The presence of hot water makes the washing procedure more comfortable. This is especially convenient in cool weather.
• The water is heated in an optimally short time. You can use the sink on request.
• Depending on the type of device, it can be installed in any convenient place, even with limited space.
• The presence of temperature adjustment of heating water allows you to save on electricity and choose the best temperature level.

• These products are indispensable in the country, where hygiene is important to a greater extent.
• Designs can be bought at affordable prices. It will not hit the family budget.
• Models have a lot of types and forms. This allows you to choose the most convenient option.

Disadvantages:

• The presence of a system with a constant emptying of the bucket can not be called convenient.
• It is important to constantly monitor the level of water used and the amount of used water.
• Not every cottage has electricity. If not, the installation of such a product is not possible.
• This device can not always be installed in the yard. Unlike street models, it has a binding to the network.
• Not every type of material used is durable. Some elements of the budget models are not designed for random mechanical damage.

The electric country washstand with heating has several versions.

Depending on the type of construction, it can be:

• on the rack - a tank without a sink and cabinets;
• with a curbstone - a tank + a sink + a curbstone;
• without curbstone - tank + sink, separate tank.

The first option is a small portable version, more like a boiler. Its volume may be quite small - within 5 liters. At the heart of the design remains a tank with an electric heater and a lid, temperature control and a tap. The model is held at the expense of the skeleton-rack, it takes up little space, it drains to the ground. The tank with the heating element is located on top of the metal rack. Below for stability, you can provide supports, which when pressed will be driven into the ground.

Products of the second group are relatives of the famous washbasin “moidodyr”. Such models differ in a complete set. They have a tank and a pedestal, on top of which is a small sink. The only difference from its famous descendant is the filling elektrobachok. Such designs are excellent for giving, they are spacious, have different shelves for hygiene products. Sometimes these models are complemented by small mirrors.

Products are factory and homemade. Own production is due to the simplicity of the device. In this case, the master has the opportunity to independently choose the volume of the future washstand, the capacity of the tank, its presence, and the convenience of its location relative to the source of electrical power. With a scrupulous approach to manufacturing, the finished design will not yield to the factory equivalent in quality and durability.

In the production of washbasins for giving use different raw materials. Options completely made of stainless steel, to find the sale of problematic. In order to reduce the cost, trademarks use a combination of materials. For example, the most budget type of materials for such sinks is plastic. It differs in ease, simplicity of leaving, its use in production allows to lower expenses.

In most cases, the tank is made of stainless steel., due to which it is the most durable part of the device. Often, manufacturers replace stainless steel enamel. However, this material is quickly deformed, which is reflected in the appearance of the product and its functionality. For the case of summer (garden) washbasins use plastic, metal and wood, including chipboard.

In order to get acquainted in more detail with the designs of summer wash basins with heated water, you can refer to specific examples produced by popular brands.

The brand offers options with or without a drawer. The washstand with the cabinet is a seemingly traditional “moydodyr”, however, with a claim to originality. The capacity of the tank, which is coated on the outside with white enamel, is 17 liters, and on the inside it is protected against corrosion. The model is equipped with a stopper for quick discharge of water. Power TENA is 1.25 kW.There is a thermostat, water heating to the desired temperature will take about 25-30 minutes.

The design is made of plastic, its average weight is about 12 kg. The device provides for mounting the tank on the wall or stand. The product is resistant. The capacity of the tank is 15 liters, the water in it is heated in 10 minutes. The model is equipped with a thermostat, due to which the selected temperature will be constantly maintained in it. Despite the controversial reviews, found worthy of purchase.

Washbasin with heated water, featuring a greater width in comparison with other counterparts. It implies using under washing dishes: it has a sink and a place for storing washed utensils. Due to this, the design is convenient and especially indispensable in the country. Unlike models of other companies, it has 2 doors that can be locked with magnets. Due to the greater internal capacity under the cabinet allows you to place inside a bucket for draining waste water and a container for garbage. Provided for discharge into the drain hole.

Variant of a bulk electric washbasin with a propylene tank. The capacity of the tank is 12, 19 liters.Water heating takes place within 40 minutes. Price category of the product is above average, the model provides for wall mounting method. The mains voltage is 220 V, the rated power is 1.25 kW. The product does not have a pedestal, differs concise design. There is an auto-off feature of the heater when the maximum temperature is reached. Product weight is 4 kg.

The design with a tank material from a stainless steel, is calculated on 30 l. Water is heated to the desired temperature within 40 minutes. The price is average. It has a lattice for soap, a convenient drain, due to which the accumulation and stagnation of water in the sink is excluded. The device provides for the disposal of used water in the sewer. The weight of the washstand is 15 kg. Sink and tank made of stainless steel. Curbstone covered with powdered polymer paint. The range of the thermostat is 30-70 degrees.

These products are made on the basis of models without cabinets and sinks, so they are compact and even with sufficient capacity do not take up much space. The volume of the tank is 20 liters. Heating to a temperature of 60 degrees occurs in 45 minutes.The tank shell is double-layered, for this reason it keeps the desired temperature for a long time. The model of the crane is quadruple, the fastenings are reliable. The water inlet is located above the heating element.

When buying a model of a country wash basin with heated water, it is worth considering a few simple recommendations.

This will help to choose a quality product that will last for many years.

• Ask the seller thermoregulation system. Thermostat options are more expensive, but the water will be hot all the time.
• If you plan to use the sink in the street, pay attention to models with polycarbonate sheathing or metal products.
• Always focus on the quality of the material. Plastic flexes under pressure. Choose the option with a stainless steel sink.Inside the storage tank must be a special anti-corrosion coating.

• If you want to buy a washbasin made of chipboard, it should at least be impregnated with moisture. It is worth remembering that such a product will quickly lose its original appearance.
• Pay attention to the volume of the tank under water. For 1 user, 10 liters is enough, two will need a tank of 10-15 liters. For a family, it’s worth picking up a 20-30 l model.
• Check the operation of the heating element. It should consist of a copper tube with a heating coil of nichrome. Heating must be fixed securely.
• If you need a simple model of a stationary type, it is better to choose the first option between the option with a stand and without it.
• The doors of the model with a cabinet should have magnetic closers, and the entire structure should have legs. This will ensure air circulation under the sink, which will extend its service life.

Some models of devices are made from scrap materials. Consider a simple garden washbasin design. Depending on the chosen option, in the process of work you will have to pick up and mount the tank carrying the rack, tabletop,a system for collecting and draining used water; and heating.

Initially, it is necessary to make a schematic drawing or drawing of a future product.. It should be noted the position of each part, its size. In order not to forget anything important, here specify the necessary nuances. As the frame is preferable to use metal profiles. The connection is best made by welding. However, if such a device is not available, you can try to do with bolts.

If the frame made of metal seems difficult to self-manufacture, you can replace it with wood. It is easier to work with him, but the wood is inferior in performance with iron and will last no more than a few years. Next may require replacement or repair. For the countertop, it is better to choose a material that is resistant to the constant effects of moisture - plastic sheet or polycarbonate. As an additional protection (plating) products can choose a variety of finishes, for example, mosaic.

To organize the drainage system, first of all, it is necessary to prepare the sink. You can use the old one or buy a new one in the store.Take care of the need and the purchase of corrugated pipe to drain the tank to drain. Be sure to need sealing gum, as well as sealant. The perforated pipe is placed on the site where the soil has a large absorption capacity. In some cases, drainage is performed. To do this, the pipe is buried in the ground at a depth of 2-3 m. Sometimes it is wrapped with geotextile.

As a tank, you can use a reservoir of plastic with dense walls. Canister, cube. TEN buy in the store. It is installed in the tank horizontally. It is necessary to fix it on the side wall and closer to the bottom. Such an installation system will be a guarantee that it will not burn out. With this method of fastening, the contacts of the heating element are placed on the side, and they will rarely get sprayed with water. If the model has a sink, build the back panel. On top of it attached tank with a heater. The sink is fixed at a convenient distance below. For the panel it is better to choose a durable and reliable material.

When performing metal cabinets produce accurate measurements, select sheet material of the desired thickness. The drawing is transferred to the metal in full size. Since it may not be enough for a full layout, the parts are cut out separately using a grinder. In the right place make a hole under the door. After this, the parts are welded together and the door is mounted. Above fix the sink. Pick up the desired height of the location of the tank and attach it to the base, connecting with the cabinet in a single structure. If provided for by the model, make a shelf under the soap. If you wish, you can supplement the design of the pedestals with legs, having previously built them immediately after welding the main parts.

If a rack is provided, make a model is easy. After the tank is assembled, the heating element is installed, it will remain to make the rack itself. For this you can use different raw materials, for example, metal. The pipe of the desired length is folded in the shape of a wide and low letter “P” in the form of parallel profiles. Support for the bottom can be bent more.

Washbasins with a water heater are considered a good acquisition for summer houses. They really help out summer residents. As buyers note, these are convenient, necessary adaptations that make a stay in the countryside more comfortable. Users note the relevance, compactness, modern design and good fit products in the decor of the premises. Equally important is the acceptable cost of such structures.

Overview of the sink with pedestal and heated water - in the next video.