How to choose bath feet?

If you are thinking of buying a bath, you must immediately pay attention to the choice of legs for it. In our time, the choice of filling for the bathroom - one of the challenges. After all, there are so many offers, the assortment is so large that the eyes diverge. To choose a product that will last a long time and will be a stylish element in the interior of the house, you need to take into account the recommendations below.

It is possible that a comfortable bath in the form of a graceful design can be placed in the center of the room. In modern design, such a move is a luxurious addition to the interior, is considered an elegant solution, it looks very dignified. Today practiced a variety of options for the location of the baths.But do not forget that it should be not only beautiful, but also reliable. Nowadays, modern baths on graceful legs are no longer considered an exotic element, they can easily be bought in an ordinary plumbing shop.

An important criterion is the size of these very legs. Before you purchase such accessories, you need to think about the actual height of the cast-iron or steel bath. If you choose between models that are not adjustable in height and models to be adjusted, note that the type of supporting elements also depends on this choice.

Unregulated legs have a standard height: short 19–20 centimeters, and high - 40 centimeters. Determine immediately what level to install the bathroom. Subtract the height of the font from the resulting number and get the exact data at which level you need to install the legs. The optimal height for unregulated models is 120 mm.

Unlike unregulated models, adjustable ones are more practical, they allow you to change the actual height of installation of a steel or cast-iron bath. The standard height is also one hundred twenty millimeters.It is far from always that such structures perform the functions of the necessary support for the bath.

A modern, beautiful bath can be a decoration of the house due to its installation on the original legs, to become a kind of designer object. Special supports may be necessary for proper functioning and stability of the bath.

A wide selection of decorative and original modern legs are made from such high-quality metal as bronze. They can take the form of unusual mythical paws, enchanting colors, images of elves and magical fairies. It looks very stylish and relevant both in modern design and in rooms decorated with antiquity.

The legs are one of the components for the bath, they can be purchased together with the bowl. It is better to do it right away so that the bowl matches the size. This is a necessary condition for further ease of installation. The legs, which are necessarily included in the kit for each bath, the manufacturer is responsible for the complete set, perform the following functions supporting, compensatory and decorative function.All these functions are very important both in aggregate and separately.

Based on these functions, we can distinguish three types: support legs, original famous raised legs and auxiliary legs. In today's market, such a rich selection of these accessories can not go unnoticed. It immediately becomes clear that each species has its own function and is an important element in the installation of the bath. Manufacturers can offer the buyer and the combined options, there is also a wide assortment both in price category and in design.

Today it is easy to find the best option supports and legs for cast iron, acrylic or steel containers.

Consider the most current types of supports.

1. Reliable supporting structures that perform the support function. These products have a rigid mount that will not allow it to slide or swing when using the container.
2. Necessary to impart sustainability auxiliary elements. Used to install the bath on a flat floor surface for the purpose of fixation and ensuring immobility.
3. Final - variable, adjustable feet.Here, the height of the legs can be customized with screws, which is very convenient and practical.

It is worth noting that the main differences of all the legs are in such characteristics as strength, fastening reliability, withstand load. It depends on the tightness of the legs and the correctness of fastening that the bowl is securely fixed. Today, gold or forged overhead products are becoming increasingly popular.

The choice of legs depends on the type of bath you choose and from which material. Consider the three main types of bathrooms and determine which type of legs is suitable for each of them.

One of the most popular options in the apartments is a cast-iron bath, which has proven itself to be reliable, durable and easy to use. Accordingly, such models have a high price, which is not surprising, since a large amount of cast iron is used in their production. Since such an unquestionably winning bath is heavy, the design for the bowl must be as reliable and safe to use. Therefore, the high strength of the supporting elements is obligatory in this case.

There are several mounting options for these legs. One of them serves for the installation of bearing supports, fastened with a wedge between special projections. The second fastener - nuts, is used mainly for decorative legs to hide an unaesthetic type of support. Moreover, hydromassage systems are built into modern cast-iron baths according to new technologies. It will cost much more. The cast iron legs are more designed to hold a bulky and very heavy bath, and go along with them on sale, in the enclosed package.

It is recommended to purchase a decorative set that will hide the main support. A bathroom with such unusual and original decorative elements will create an atmosphere of comfort and coziness in the room. Bath separate oval cast iron is often equipped with high sides.

The following features of the legs intended for a cast-iron bath can be distinguished: They are made directly from reliable cast iron; it is necessary to additionally fix with the help of the construction of the podium of brick structures; sometimes with the help of nuts fixing decorative supports; even simple support legswedge embedded in the designated ledges.

Most consumers prefer a frame made of light steel. Thanks to him, you can set the room in the direction of high-tech style and at the same time get a reliable and safe design.

Acrylic models have gained enormous popularity today. The elegant legs of acrylic baths are two metal bars that are attached directly to the bottom of the tub, and the legs themselves are screwed into them. It is a versatile, convenient and easy to use design.

The main advantage of acrylic baths is the general availability due to the relatively low cost. There is also a very large selection of colors, sizes, designs in stock, which is a plus when choosing in the market for offers. The low weight of acrylic baths is a distinctive feature that affects the choice of legs. After all, the shape of the legs should be stable, safe to use. Although the legs in this case carry a more decorative function, since the additional frame takes on the supporting one, it is he who supports the entire structure.

Particular attention should be paid to the installation of corner baths.Here, in addition to the main fastening, a frame from a shaped pipe in the shape of a cross is also required. In combination with tightening to the wall, it is possible to achieve a uniform distribution of loads between the floor and the walls. From durable pipes, which assume the entire weight load, consists of an installation for acrylic baths in the middle of the room; this interior is a great success today. Speaking about the design, it should be noted that such a construction can not only change the interior, but also create a new decorative orientation of the room.

A distinctive feature of a steel bathtub from a cast-iron bath is that it is lighter. This bath is installed on two pairs of legs made of sheet iron. The legs are attached to a curved plate that supports the bottom. They can be fixed as bolts, and other adjustable fasteners. An alternative method of attachment is a single structure on four legs. This design is fastened with studs to achieve greater rigidity.

Without a reliable support, the steel bath can fall, so you need to fix it so that it is not only beautiful, but also safe.Depending on where the bath is installed and how to install and fix the feet.

Consumers mark such positive qualities of steel baths as strength, low weight, low cost. In the sales market, it occupies high positions, because it is easy to install it at any place, at any height, in a convenient position for you.

Also for such a bathroom is given the opportunity to purchase special frames, allowing a bath in any part of the room. This is a very original and bold design. At the same time, ugly legs can be closed with decorative overlays, which will add even more piquancy and refinement. Contrast legs look very good with steel bathrooms: black for white baths or shiny steel or white for colored ones.

In some cases, when it is necessary to adjust the height of the attachment for a perfectly smooth installation of the bath, resort to the use of universal legs. When buying these feet, you should consult with a specialist, since such legs are not suitable for all baths. Additional fixation methods may be required.Sometimes sellers offer self-made legs, they need to be treated with caution, since they cannot provide long-term perfect support.

To make a win-win choice at the time of purchase, it is worth determining which models are most attractive and popular. Among them is sure to find the perfect combination that suits you.

It is the baths that stand apart, as opposed to the built ones, erase all the boundaries of the imagination, because the manufacturers took care of a large selection of different shapes, colors, and dimensions of this design. The oval, circular, rectangular, and even sample baths, as in the old days, are presented to the attention of the buyer, each of which has the size necessary for you, for example, the Roca brand.

Cast-iron baths are increasingly wearing classic forms, but the acrylic bath has a huge range of colors and shapes. Also very original baths from unusual materials, such as wood, artificial marble, exclusive glass. This is the pilotage of all the desires of the consumer. Of course, it is very difficult to give preference and make a choice.But after the bath model is still selected and installed, you can apply some more tricks in the interior of your bathroom. For example, you can install a canopy with a white or transparent, weightless curtain of tulle.

It is very original and exquisite looks. Designers explain the need for such attractive-looking products with the modern desires of consumers to buy something unusual and add chic to the ordinary interior. It is with the help of catchy and compelling baths that the opportunity to express your good taste opens up. You can decorate the interior with a beautiful fountain or a small aquarium, and then the bathroom will look like a paradise garden.

When you finally came to the conclusion that you want to have a bath on curly legs, Note the following rules.

• It is important to remember that before making a purchase, it is necessary to check all fasteners, reliability of the legs. It is worth timely to decide whether the chosen size is suitable for the bath of your uniform.
• Do not forget to pay attention to the material of which the legs are made, it should be designed for large loads.The most common reliable materials are steel or bronze, and enameled iron will do.
• It is not necessary to install the structure on old surfaces with cracks. In this case, the security rules are violated. It is recommended to change the old coating to a new one before the start of work.
• When choosing the legs, do not forget what function each of them carries. Does this leg serve only as a decoration, or is it the main support for your bath?

• Remember that such fasteners as adhesive tape, can not be considered reliable. Moreover, it is unsafe. Although many are attracted by its ease of use, its use for these purposes is contraindicated. It is better to use such strong fasteners, such as screws, brackets.
• When installing the bathroom in the right place, avoid scratching the floor and the product being mounted. To do this, when fixing fasteners, it is recommended to turn the bath upside down or lay on its side.
• Properly select all plumbing accessories so that the overall look is not spoiled at the end of the work.

The bathroom must not only be assembled, but also firmly fixed on the surface. Sometimes it is necessary to put special linings and fasten them to the product.They can also be attached with a special moisture-resistant construction adhesive.

Do not forget to decorate the places in which they decided to fasten the legs. You can decorate with different materials and methods. In such a difficult task, like installing a foot bath with your own hands, you need to take into account a lot of expert advice.

Consider the main ones:

• be sure to verify the integrity of the kit, whether it is staffed by existing standards or not;
• be careful when choosing a place for your bath, you must consider all possible nuances when installing;
• Be sure to install a brick structure;
• prevent and avoid scratching the bath surface; use gasket materials during installations;

• if you want to install a bath next to a wall, then do not forget that you will need additional fasteners for the purpose of security of installation and installation;
• in order to avoid the appearance of mold on the surfaces, in any case, do not neglect such an important matter as pre-treatment of the wall;
• give preference to universal legs, they are suitable for almost all models and therefore it is impossible to make mistakes when choosing;
• use overlays if you want to hide ugly supports.

Summing up, we can distinguish the following advantages of the correct choice of legs: a reliable support, a spectacular design accessory, height adjustment. Cons: most of the baths are sold without legs, there is a risk to make mistakes when choosing them. Improper fixation of the supports in steel and cast iron products over time leads to negative consequences: the enamel surface cracks, the bottom is deformed; weak legs break. Cast iron and, to a lesser extent, steel are heavy. The weight of water filled fonts is maintained only by reliable bases, which are not so easy to pick up.

However, all these arguments for and against can be balanced by turning to qualified professionals for help. So you can make the only right choice, thanks to which a well-standing bath will delight its owners for many years.

How to install the legs on the bath with your own hands, see the next video.