Clothes dryer "Liana": characteristics and installation instructions

Most residents of urban high rises dry laundry in the apartment. To equip a place to dry things indoors, at first glance, is quite simple. However, it should be remembered that the installed structure should be as efficient and convenient as possible, and also not take up much space. Clothes dryer "Liana" is an ideal option even for small apartments. Design specifications and installation instructions will be discussed in more detail in this article.

For drying things in multi-storey city houses, ropes were previously used, which were attached to iron structures on the outside of the balcony. This option, of course, saves space in the apartment. However, clean things on such a dryer can easily become dirty from dust or even fall off the rope. Ordinary clothesline can be mounted in the room. However, it is rather difficult to arrange them optimally. If the rope weighs too high, it will complicate the process of hanging and removing clothes. At low locations, clothing can get in the way or get dirty, in contact with other objects in the room or on the balcony. In addition, the dust rather quickly accumulates on the ropes and will not be able to completely remove it with a simple damp cloth.

The design for drying "Liana" differs in compactness and functionalitythat allows you to install it in bathrooms, loggias and balconies almost near the ceiling. The main feature of the work of such a system is that small strips on which things are placed can change their position (fall or rise).

Among the advantages of the “Liana” dryer are the following.

• After drying, there are no traces left on the linen, like from thin ropes or woods, which would be difficult to smooth with an iron.
• Easy to care. The design is easy to clean from dust and dirt. To do this, wipe it with a damp cloth. When drying clothes, you can be sure that there will be no dirty marks from the dryer on the fabric.
• Compactness. The device can be installed high enough, so that the "Liana" will be almost invisible.
• Resistance to heavy loads. One tube can withstand up to 2.5 kilograms of clothing. If you comply with this requirement and do not hang up too much clothing on the tubes, the design will never break or bend over the weight of the laundry.

• Easy to use. Such a system works by analogy with an elevator. By lowering the slats to a comfortable level, you can easily and quickly hang out the washed things, without getting up on the chair and not trying to reach it. After the laundry is hung, the plank rises to the desired height.
• Tubes do not rise all at once, but in turn, which minimizes the load on the hands.
• When drying linen straps can be installed at different heights.Cascaded items dry much faster.

However, like all dryers, this design has its drawbacks. It is worth noting that the disadvantages of "Liana" are primarily associated with a particular model and manufacturer of the product.

According to customer reviews, poor quality products have the following disadvantages:

• the ropes jump out of the rollers, so you need to bandage these elements manually;
• plastic parts break down quickly;
• in the case of improper installation design quickly fails.

Dryer "Liana" is available in two versions: ceiling and wall. When choosing a model, it is worth considering what surface the main load will be on. Ceiling options imply a load on the ceiling. Tension and suspension structures can not withstand a lot of weight.

When the type of facing material is not able to withstand heavy loads, and there are no metal corners for fastening the structure,It is best to use a wall model.

Wall "Liana" differs from the ceiling model only in the way of fastening. Consoles, which will hold the entire system, in this case will be attached to the wall.

In the modern market you can find dryers "Liana" of various sizes. In many ways, the parameters depend on the manufacturer. The width of the product usually varies from 1.4 to 2 meters. As for the length of the tubes and the design itself, then there may be a large number of different options. The most common minimum length is 1.3 m. Standard dimensions also include the following: 140 cm; 150 cm; 160 cm; 170 cm; 180 cm; 190 cm; 200 cm

For the manufacture of certain elements of the dryer "Liana" manufacturers can use different materials. The quality and reliability of the structure as a whole will depend on this. The cylinders on which linen is placed can be made of metal or plastic. Metal tubes have a protective anti-corrosion layer.

Dryer "Liana" is a wall or ceiling structure of small size, which consists of several simple parts.

The system includes the following elements:

• one pair of metal holders with rollers;
• metal or plastic tubes that play the role of hangers for wet laundry;
• mounting brackets;
• ceiling or wall console;
• ropes (strings);
• caps.

Plastic or metal cylinders can be 0.5 to 3 meters long. Their number may vary. Usually the kit has 4-5 bars. Each tube is equipped with two ropes of different lengths. A long string passes through one roller on a special holder. Through the second roller pass both long and short cord.

The entire system is attached to the wall or ceiling consoles, which are the basis of the whole structure. At the ends of the ropes fixed special caps that allow you to raise and lower the tube to the desired level. When assembling the structure, it is important to observe the minimum allowable distance from the floor (1.2 meters), to which the cylinder can sink.

Despite the fact that "Liana" is considered a reliable design for drying clothes, certain models are not the best quality. When choosing a device, you need to carefully study the characteristics of the product. The distance between the cylinders (tubes) should be quite large. Otherwise, things on the adjacent planks will be confused with each other.

The length of the tubes can be up to two meters. It should be borne in mind that the longer the cylinders and the design as a whole, the greater the likelihood that the dryer will deform from the loads generated during operation.

It is also important to take into account the material from which the tubes and fasteners were made. Plastic parts fastest fail. Aluminum structures are the best option for weight and reliability. Steel products create a sore load on the walls or ceilings, but such dryers are the most durable.

Models of dryers "Liana" may have a different number of tubes included. In addition, the type of cylinder depends on the maximum weight of clothing that can withstand the item.

The quality of the dryer depends on the manufacturer of the product. Designs made in China are not durable and reliable. When buying a product from a model from China is better to refuse. It is necessary to give preference "Lianam" from domestic or European manufacturers.

Despite the fact that the range of dryers "Liana" is quite large, some modifications have earned particular popularity. This is due to the quality of the design.

Among the popular models are:

• Gimi Lift 160 and Gimi Lift 200;

• Luminarc Liana 1.4;
• Comfort Alumin 1.5 m and Comfort Alumin 2.5 m;
• Dogrular SP1505.

Italian-made dryers Gimi lift have a rather high price compared to similar products from other manufacturers. The price is due to the high quality of the materials used for the manufacture and construction as a whole. Cylinders are made of steel, which is covered with a protective layer of epoxy powder. Regardless of the length of the tubes, the maximum load that the Gimi Lift dryer can withstand is 12 kilograms.

Model Luminarc Liana 1.4 produced by a French company. The price of the dryer is much lower than the cost of goods brand Gimi. However, according to technical indicators, Luminarc Liana 1.4 is not inferior to peers from other manufacturers. The main material used for the manufacture of such a structure is steel. Model Luminarc Liana 1.4 is available in a complete set with five rods. The maximum load on the dryer can be up to 12 kilograms.

Dryer Belarusian production Comfort Alumin most common in two versions, the size of 1.5 and 2.5 meters. Both models are available in 5-cylinder configurations. The distance between the cylinders is 10 centimeters.The maximum allowable load on the structure is 10 kilograms. Such models are made of plastic and aluminum.

Russian model Dogrular SP1505 designed for mounting to the ceiling. The weight of the structure is 2.1 kilograms, and the maximum permissible load is 10 kilograms. The dryer is made of plastic and aluminum. The model has an attractive design, good quality and low cost.

Installing "Liana" is not a difficult process. To assemble the structure it will be enough to study the assembly scheme and installation instructions, which must necessarily be indicated on the product packaging.

To install the dryer you will need the following tools and fixtures.

• Perforator. Alternatively, an electric drill will do. This tool is needed to drill a small number of holes in the walls or ceiling. It is necessary to drill not only a layer of finishing, but also a base of concrete or other material.
• Measuring tape and black lead pencil. With the help of a tape measure the necessary measurements are made.Pencil marks on the surface of the wall or ceiling for fixing the structure.
• Fasteners. Most often they already come complete with a dryer.

• Cordless screwdriver or ordinary screwdriver.
• Knife.
• Dowels and screws. Dowels with a size of 0.5 cm and self-tapping screws - 0.4 cm are usually used.

The area of ​​the wall or ceiling to which the structure will be fastened must be cleaned of dust and dirt. Before you start the main work, you should read the instructions for the selected product. Some models may have their own installation features, which at first glance seem insignificant. However, if you omit some of the installation recommendations, the structure will be attached incorrectly, which may cause a quick breakdown of the dryer.

Metal holders apply to the surface of the wall or ceiling and make a pencil mark through the holes in the details. At this stage it is important not to be mistaken with the measurements: the distance between the holders should be equal to the size of the tubes. At the marked points it is necessary to drill the holes for the dowels. With the help of screws is fixed ceiling or wall consoles andcontrol brackets.

Next, you need to distribute and pass the rope through the roller, which is located on the right holder. A cord of greater length is additionally pulled through a roller on the left holder. The ends of the ropes are passed through fixing caps on the control bracket.

The quality and proper installation of the dryer will determine its performance and service life. Even a minor error in the installation process can lead to a quick breakdown of the whole structure or its individual elements.

Consider the most common mistakes that can occur when fastening "Liana".

• Errors in the calculations. The model of the wrong size to properly place will be quite difficult. Ropes may not be stretched too tightly or, on the contrary, be too tight.
• Incorrect installation location. Windows, interior or balcony doors and cabinet doors when opening can touch the dryer.
• The quality and reliability of fixing the structure depends on the fasteners. It is important to choose the right size screws.

• Do not use nails to fasten the structure. This method of fixation can lead to a rapid unbalance of the whole system.
• Using power tools with drills of unsuitable thickness.

In the next video you will see how to install the “Liana” laundry dryer.

Dryer "Liana" is often installed on balconies or loggias. The room should be glazed. In the absence of a double-glazed window, clothing in the process of drying may become dirty from dust or precipitation. In winter, wet things will instantly freeze at all.

The dryer can be installed in the house itself. Despite the fact that "Liana" is quite compact and does not take up much space, it is better to install the product in a place that is hidden from prying eyes. Often, such structures are mounted in the bathroom. In rare cases, the product is installed in the dressing room, bedroom or hall.

Ceiling "Liana" is not suitable for fixing on suspended ceilings. The exception will be the presence of special fasteners in the form of metal corners on the rough finish.Also, the dryer should not prevent the opening of cabinets, windows or interior doors.

Dryer "Liana" does not require careful maintenance. The design is recommended only to periodically wipe with a damp cloth to remove the accumulated dust. The exception is made of plastic tubes. To prolong the life of plastic parts, they must be wiped with a dry cloth after each drying, so that moisture does not accumulate on the surface.

With the breakdown of most parts of the design, they can be easily replaced. The stores sell individual components of the dryers "Liana". Mostly failures cords or cylinders. Changing them will not be difficult without dismantling the structure itself. With proper operation and high quality fixing the dryer can last up to ten years.