Greenhouse "Yield": description and assembly instructions

In our country, many people have their own small piece of land, where they grow the necessary food for themselves: vegetables, fruits, greens. Almost everyone faced such problems as low yields or vegetables burnt in the sun. Such problems can solve the greenhouse.

Greenhouse "Yield" - reliable and versatile, one of its main advantages is the mobility of the structure, which significantly affects the increase in yield. It is convenient and practical, and most importantly - easy to install, if you have on hand detailed instructions.

Every experienced gardener dreams of his big crop, ripe and tasty. But some factors are constantly getting in the way of achieving such goals.And all because the Russian climate is very capricious. One day there is hot weather with a temperature of + 30, and on the other - the sun does not appear on the horizon at all, and it rains constantly. Such abrupt climate changes significantly affect the percentage of yield, and the taste of products, and their quality.

The greenhouse will help to cope with such situations. With it, you can maintain the optimum temperature in the greenhouse, which is so necessary for the constant growth of products. Also, the greenhouse plays the role of protection from harmful insects, wind, rain and other manifestations of nature. In addition, the greenhouse model "Yield" has great advantages over other similar structures.

• All greenhouses are made exclusively from environmentally friendly materials. Simple arcs, which are most often used for the base of the greenhouse, are made from metallic materials. They, in turn, may be subject to corrosion, and then they will emit harmful and toxic substances into the soil, which will have a bad effect on the land and yield, including the quality of products.

• Agrofibre film. If you equate agrofilm, then it, unlike other films, retains the maximum amount of temperature with minimal losses. In addition, due to its properties, agrofibre inside the greenhouse creates air circulation and, thus, protects plants from excess moisture. Another positive side of this film is the fact that it is moisture permeable. Now it will not be necessary to remove the film in order to water the areas under it, but you can water it right through the film. At the same time, the film is strong enough to not miss rodents, insects and birds. Also, the greenhouse can simply protect plants from hail, even large. Special pegs make the greenhouse fairly stable. Due to their height and teeth on one side, they will easily enter the ground.

Grade greenhouse "Productivity":

• special arcs;
• agrofibre;
• pegs for installation of agrofibre;
• clips for fixing the film.

In addition, greenhouses are different:

• 3 meters;
• on 4 meters;
• on 6 meters;
• on 8 meters.

Not all people appreciated the dignity of the greenhouse. Some have found flaws: did not like the assembly of the greenhouse, moments such as: tightening the door, sagging film, dysfunctional film alerted consumers. These cases are units and, most likely, this happened due to improper assembly of the greenhouse at the very beginning.

Assembly instructions consist of many small sub-items. If they are followed closely, any person without any problems will be able to quickly and accurately establish a greenhouse.

1. It is necessary to install the stakes in the arc, after that it is good to stretch the greenhouse over the beds to be covered.
2. Then it is necessary to fasten all the knots well on the stakes. The first two stages are the most important.
3. The basis of the "Yield" consists of galvanized steel pipe. Its height is on average two meters and twenty centimeters, and its width is two meters and fifty centimeters.The length can be any, the main thing - to at least two meters. In the greenhouse there are two built-in vents - it is thanks to them that the airing takes place. There is also an entrance, it consists of two doors. The distance between the arches is one meter. If desired, the greenhouse can be covered with any cellular polycarbonate or white agrotex.
4. The base of the greenhouse can be installed directly on the ground, and if you wish, you can make your foundation. The frame weighs a little, so if necessary it can be moved and moved anywhere.
5. Put on the film, check whether everything is properly fixed.

Thanks to a simple and easy assembly, in a few minutes the owner will be able to quickly install the “Yield” anywhere, without even having a foundation. Also, in order to install a greenhouse, you will not need a huge amount of tools, everything is done quickly and easily. Unless a hammer will be needed in order to secure the pegs in the ground.

• Greenhouse significantly affects the increase in yield and product quality.
• The design can protect the fruit even in the hottest weather and vice versa, cold, rainy, windy, as well as from pests.
• Can control moisture.
• It creates a comfortable environment, ventilation and proper air circulation, so you no longer need to constantly open the door in order to ventilate the greenhouse.
• Made from environmentally friendly material.
• Comfortable, lightweight, compact.
• Can be used repeatedly.

Those who used this greenhouse, note the convenience and environmental friendliness of a spacious structure that can be transported from place to place, while quickly assembled and vice versa, disassembled, it is convenient to carry around the site. Well retains moisture and temperature, perfectly protects against insects. The product increases the yield by 25-30 percent. At the same time inexpensive.

Of the minuses - a slightly unstable frame, which is poorly fixed to the ground.

Review the greenhouse "Harvest", see the video below.