Ceresit tile adhesive: types and consumption

Before facing works indoors, you must carefully select all the tools and materials. There is a wide variety of products from different manufacturers on the market, so sometimes it takes a long time to look for something that will meet all the requirements and demands.

Of course, everyone wants repair to go quickly, but qualitatively, and this depends on the materials used in the course of work. For example, if you decide to use ceramic tiles in the decoration, it is important to choose the adhesive mixture that will reliably hold the material, performing its direct task.

Pay attention to the products of Ceresit, which is quite popular. The German manufacturer of finishing solutions offers the consumer a high-class product, which includes only environmentally friendly materials, which is the main advantage.The brand offers a wide range of adhesives, which have several advantages and all the necessary characteristics.

During the finishing of the premises an important point is the purchase of high-quality adhesive composition.

It should have the following indicators:

• good adhesion;
• water resistance;
• strength.

At temperature drops, the adhesive mixture will not release harmful substances and toxins.

The remaining advantages of the products include the following:

• Excellent adhesion is the main indicator of the quality of the material for lining.
• Ceresit adhesives are characterized by high frost resistance, water repellency and creep resistance.
• As for the cost, it all depends on the series of the mixture that you have chosen, but the products are pleasantly surprised by their availability. In addition, during the repair is not recommended to save.

If you need to make the finish in a room with high humidity, then it is recommended to choose glue from the SM-11 series. Such a composition copes with its task in such conditions, does not lose properties during temperature drops. Experts point out that It is easy to operate. The mixture resembles glue, as it has a high adhesive ability, and this is important if you decide to tackle the walls.

The harm of such a composition is minimal, so many use it at home.

Glue for a tile from this series has received a lot of positive reviews. It is actively used by both qualified and experienced craftsmen in the field of repair, as well as those who are engaged in lining themselves.

It should be noted that this glue belongs to the category of the most popular. It is suitable for work both inside and outside buildings.

The consumption of material depends on the parameters of the tile that you chose for cladding. If the area of ​​one element is 25 square meters. cm, then 1 square. m will need about 2 kg of the substance. This indicator increases depending on the dimensions of finishing materials. For plates, the size of which reaches 60x60 cm, and porcelain stoneware, choose the adhesive mixture SM-12.

Since we are talking about a large-format tile, it is better that the mixture be plastic, flowing consistency. Thanks to this glue will be easier to apply. The consumption of material depends on the dimensions of the room that you will veneer.

Universal is considered glue Ceresit SM-14which is able to securely fix large-format tiles. It is suitable for interior work with high humidity, so it is recommended to use it for decoration of kitchens and bathrooms. As for the drying time, it will take no more than a day.

If you decide to do the outer lining, using artificial stone, you can choose such an adhesive composition. It is elastic, can withstand the expansion of ceramics, and after many years does not crack. For tiles of small size about 2 kg per 1 square meter will be enough. m, but if you choose more finishing material, then you will need to triple this mass. Of course, here you must also take into account the size of the side of the grater tooth, which you use for applying the adhesive composition.

The next version of the mixture Ceresit - SM-16. It is intended for fixing any types of tiles, including ceramic, clinker facade, ceramic-granite.It does not matter what basis you want to issue. It may even be PVC coated. Clay perfectly copes with its task when working inside and outside. It is characterized by increased elasticity, therefore it prevents the creation of chips during deformations.

The important point is that the product contains cement, which under the influence of water creates an alkaline reaction. This means that before applying it is necessary to take care of the protection of the skin and eyes. One of the advantages of the glue is its economical consumption, since even if you use tiles up to 30 mm, then by 1 square meter. m you will miss up to 4 kg of material. But if you choose a combined method of application, of course, the rates will increase.

During the facing work and when choosing the glue pay attention to the time of its hardening. It often takes about a day to use the room in which the decoration is made. The only mixture of the manufacturer Ceresit, which takes 48 hours to set for freezing, is CM-9. The presence of material in the tank should not exceed two hours, so follow the manufacturer's recommendations.

Returning to the list of popular mixes of the Ceresit brand, we can note one more - CM-17. Glue is distinguished by its elasticity and high adhesion to any base. It is best suited for vertical surfaces, as well as for tiles with low water absorption. The material can be used outside the building, as it is resistant to temperature and frost. The flow of the adhesive mixture is small. It is suitable for working with different types of tiles, even if the base is in a critical condition or undergoes deformation. CM-17 has elasticity, so it can prevent chipping.

For medium-sized slabs you will need about 3 kg of the mixture per 1 sq. m, but it all depends on the conditions of use. Among the important advantages of the adhesive, it is possible to single out the fact that it is heat-resistant, so it can be used for a tile that serves as a lining in baths and saunas.

If you choose a marble finishing material, and do not want to spoil the presentability of the lining, it is recommended to use white heat-resistant adhesive SM-115.It is also suitable for silicon, has a number of positive characteristics. Its main advantage is that it does not change its shade over the years.

Summarizing, we can say that the choice of adhesive mixtures of Ceresit is very rich. Before you make a purchase, you need to decide on the type of facing material, as well as take into account the climatic conditions in which the work will be carried out. It is necessary to consult with qualified specialists, as well as strictly follow the instructions for use of the mixtures.

For how to use Ceresit tile adhesive, see the next video.