Dismantling tiles: process features

In order for any room to have a proper look, to be comfortable and functional, it is important to correctly use building materials during repairs. For the bathroom and toilet, it is advisable to use tiles on the walls and floors, the kitchen can have combined surfaces, and wallpaper in the rooms. If you violate these principles, then all repairs that have been carried out will be in vain.

In the apartment or any other living space there are a number of coatings that are used for certain purposes. Using them for their intended purpose will give the correct result, and inappropriate placement will only waste time and money. It is important to place the necessary covering in the appropriate room to guarantee its full use for a long period of time.

A stylish and comfortable bathroom can be made by using ceramic tiles, which will not only decorate the room, but will enable it to be quickly and efficiently cleaned. The constant humidity of this room leaves no other options than the use of something strong and durable. You can just paint the walls, but it is not so reliable.

If your bathroom is already tiled with ceramic tiles, but the quality of work and the coating itself does not suit you, then you can dismantle it and put a new one. And to do this, it is important to know the technology of these works and stick to it.

As for the kitchen, there, using a tile, they most often draw up a working area where the stove is located, a sink and a cooking area. It is the tile that makes it easier to remove walls from any contamination that occurs during cooking. Wallpaper with frequent wiping will be erased and spoiled, and painted walls will not look so impressive.

However, in the kitchen from time to time you need to update the area with tiles, especially if some tiles are broken or pricked.There are also certain rules for the process that you must maintain in order to achieve an optimal result.

If we talk about flooring, then as one of the options you can find quartz-vinyl tile. It can be laid in the bathroom, in the kitchen, and in any other room where it will be logically justified. The material is new and has not been previously used, its difference is not so much in the material, although it is also unusual, as in the installation variant.

Such tiles are not glued in the usual way, but they are laid using laminate technology by snapping each plate. If you want to lay down such a floor, get rid of the old coating and begin the process of installing a new one.

If we talk about the ceiling, then for this surface often use paints, wallpaper and foam tiles. If the painted ceilings do not please you, and it is difficult to glue the wallpaper, then the use of tiles will be the ideal option. This coating has been used for quite some time, therefore it is not uncommon to meet it in apartments.

When planning a renovation after a home purchase, you may be faced with the fact that your ceilings will all be covered with such squares that you would like to update with new ones.For this, it is important to know exactly how the old foam is removed and the new one is glued.

If you live in a private house and want to make a beautiful fence or steps, you can use granite tiles. This material has long been known and has earned popularity for its appearance and durability. Beautiful textures, rich appearance and long service life do not allow this coating to lose its relevance.

When planning any repairs, you need to take care that you always have what you need at hand. The absence of any tool slows down the process and increases the length of the entire repair. For cases where you will need to remove the tile and tile of different types, you will need a certain inventory.

A hammer will be needed for manual work. In the presence of several options it is worth choosing an average by weight and a little harder. The chisel will become one of the basic elements, because with the help of it all the work will be carried out.Hitting a chisel with a hammer will remove the tile from the wall in the bathroom, kitchen and other premises.

If you do not have a chisel, the impact screwdriver is quite suitable, it was originally designed to be pounded with a hammer. If you encounter difficult cases where you can not manually remove the tile, then you can use a punch.

To it must be attached a number of nozzles for work:

• chisel;
• Boer;
• peak;
• bit

A construction knife is useful in the work, but it is important that he has the possibility of replacing the blades. Another option inventory, which will be needed in the work, is a spatula. It is best to cook a few options that differ in size, but large in this case will not be useful.

You will need the chisel and tools with an abrasive edge to work with seams and inter-tile space. And the last tool that is better to have is a Bulgarian, for which it is important to purchase a nozzle for stripping the seams between the tiles.

When you have everything you need, you can proceed to repair work.

If you have little time for repairs, and you decide to do it yourself, then you need to arm yourself with the knowledge of how to dismantle old tiled structures from the walls, ceiling and floor, and do it quickly.

The first thing you need to pay attention to is the option of fixing the tiles. If it is a cement mortar, then the tile can be torn off only if you use a puncher or a chisel nozzle.

In the event that the tile was planted on a special tile glue, it will be quite simple to remove it, and the chances of not damaging it during these works are high. If you want to peel off a small number of small squares and replace them with new ones, then it is important to work carefully so as not to damage the remaining parts on the wall.

It is easiest to remove tile from walls with a chisel, hooking each element and trying to separate it from the wall. If the fixation is too strong, then you need to hold two diagonals, with a drill to make a few holes, then try again to split the tile.

If you need to remove the tile from drywall, then it is important to act very carefully. The laying process is not always done by technology, and drywall itself is a very unreliable material.

To make everything go smoothly, you need to have with you:

• drill;
• construction knife;
• drill on 6 mm;
• profile;
• self-tapping screws;
• putty knife;
• ruler with a pencil;
• putty.

The tile is removed by cleaning the seams with a chisel, then you need to pry the tile and beat it with a hammer. The plasterboard surface most often suffers, therefore, after removing the tile, it will have to be leveled and hidden.

In order to remove the floor tile, you need to split one and, starting from it, remove all the rest. For this, the necessary tool will be a chisel. If you can not remove the tiles, then you need to use a punch. And in order to save the tile and replace the floor partially, you need to work on the grout, removing it completely, and then carefully and slowly to pry the edge of the coating and try to peel it off the floor.

The technology of the procedure in all cases is approximately the same and depends on whether you want to keep the existing tile or not, whether you want to make a complete replacement of tile or partial.

If you have made a repair, and everything suits you, then it is unlikely that you decide to touch something just like that. In the event that in your tile, by some chance, one square is pricked, then you do not need to redo all the laying, you can replace just one tile.

To do this work is easy, for this you need to have with you:

• sponge;
• putty knife;
• bit;
• hammer;
• Bulgarian;
• drill.

The seams on the tile, which gave the crack, you need to moisten well with warm water, and with a spatula to remove all grout. When work is finished, you need to try to find a hollow zone in the tile in order to drive a chisel into it and easily beat off the data element.

In the event that you do not get anything, and the tile sits dead, you need to split it with the help of the grinder. On the tile there are strips of cross to cross, and a hole is made on them in the center. In it, and you need to insert a chisel, and again try to break off the tile.

In this case it is not so bad to damage the edges of the tile, because you will change it anyway.If one hole did not help you, you can make several of them by selecting points on the diagonals drawn earlier.

If you put a tile, but for some reason you don’t like the result, don’t rashly tear everything and spoil the material, you can carefully remove it and try to lay it again. To do this, you need to prepare inventory, among which there will be only a hammer and a chisel. Exactly so, manually, and it can turn out as much as possible to save plates from cracking during dismantling.

Work is done slowly and carefully, each tile is broken separately. With the help of a chisel, a suitable area is selected on a tile, where you can pick up a square and beat off a wall with a hammer. To make it easier to work, first of all you need to remove all grout from the joints. Only after this, the method of tapping goes search for hollow zones, which will allow to remove the tiles without damaging them.

Tear off the tile from top to bottom, working from the tile, which initially will be the most accessible to removal.If it was not possible to find one, you need to break the corner square and move on from there.

Hitting the tile, it is important to gently strike and not to drive a chisel or chisel too deep to prevent the material from cracking. It is important to hold the tile with the second hand and carefully separate the tile from the wall. If it is not possible to do this easily, then you need to try knocking a chisel on the other side and try again. You need to do these actions until you can easily remove the section you want on the wall.

If you need to get rid of old wall tiles or remove everything from the ceiling, you can use a punch. This option is useful for those cases where the old coating does not need to be saved, and in its place a new tile will fall.

Before using this method, it is important to check that your walls are strong and will withstand such work. It is best to turn off the electricity in order not to accidentally hook the hidden wiring.

When carrying out any work, it is important to comply with all safety regulations and use protective equipment: glasses, gloves, etc., in order to reduce the risk of injury during repairs.If you want to beat off a tile only from walls and you do not plan to work with a floor further, then it is important to protect it, having made a sheeting in the form of a sheet of plywood.

After you finish with the wall tiles, you will need to do the facing work, because the new coating on uneven and knocked down walls will not be put. As for the ceiling tile, you will also have to tinker with it, because it is impossible to manually tear it off. By mechanical impact on the place of fastening the tiles to the ceiling in pieces, you can beat off each plate and clean the ceiling from unwanted coating.

When carrying out any repairs, it is important to do them accurately and correctly. If you need to remove the paint, tile, tile, then use the right tools and adhere to technology. After removing any surface, it will be necessary to level the wall, floor or ceiling in order to be able to work with them further. All subsequent work is performed only on flat surfaces that are carefully prepared.

It is not easy to work with tiles, but it is this material that will last you the longest, and you will not regret having chosen it.The process of dismantling the old for laying a new one will require from you knowledge and skills, without which you are unlikely to have a good result.

How to remove an old tile and level a floor for new, look in the following video.