3D bathroom tiles: features, benefits, and views

Every person wants comfort and beauty to reign in his house, besides, an unusual detail will be an additional plus in the interior. A room where you can relax while taking water treatments is one of the main places in the apartment. Given the modern dynamic growth of innovative technologies, it is quite simple to arrange the original and catchy decoration of the bathroom. One of the options for the unique design of the room is considered to be a finishing tile with a three-dimensional image. With its help, it is possible to transform a room designed for hygienic procedures, even with a small area into a delightful and visually spacious bath.

3D-cladding for bathrooms is a coating of several layers that allow you to reproduce a three-dimensional image on the surface.This feature is achieved by using a specific technique of microscopic lenses. In the manufacture of coating products made of plastic or ceramics trim film carbon. The phototile gets the optical effect using a layer of polycarbonate.

The base contains a polycarbonate coating, over which a layer is made for cushioning. Then a film is applied to this layer, reflecting the light on which the drawing is placed. And on top of all this they have a very durable layer that acts as a lens; it gives the picture on the tile fragment a volumetric visibility.

It is necessary to choose the right design of the floor tile and ceramic wall tiles for the bathroom. This can help you special computer programs.

Such a modification of the facing material for a shower room has the same characteristics as a simple ceramic tile. It is important not to forget about the extremely cautious attitude with the outer coating of carbon.

Plastic products are quite resistant to moisture. But the surface on them should not be subjected to scratches. With such actions, they will lose their charming appearance and lose their luster. Chips on the material violate the dimensions depicted on the plane of the picture.

Still, organizations that produce 3D coatings assure that, under the conditions of use, the optical tile in the bathroom can be used for more than twenty-five years without losing its appeal.

Registration by volume tile is allocated with a variety. In addition to the original external qualities, this type of lining has other advantages:

• not slippery;
• resistance to very high temperatures;
• excellent waterproofing capabilities;
• long service life;

• ease of care, resistance to chemicals;
• can withstand enough weight - up to two hundred kilograms per square centimeter;
• does not cause allergies;
• resistant to mold and mildew.

This product has some drawbacks:

• Such a product is not advised to trim when laying, as the material does not tolerate deformation.
• The coating can be used exclusively indoors, it is applicable only for interior decoration.

Different compositions can be purchased according to the type of finishing material. They are mainly based on silicone, cement or plaster. It is possible to use a special tape, which has a glue surface on both sides, as well as a mixture resistant to temperature for lining electric heated floors.

It is advisable to immediately select the ideal adhesive composition for the facing material used. As a rule, manufacturers indicate on the packaging the necessary characteristics. You need to carefully familiarize yourself with them so that during work there are no problems with laying tiles.

Specialty stores have a huge selection of floor tiles. If a unique floor covering with lighting is intended, there are transparent elements of design.There are also half transparent products. Thanks to the liquid filling, which is included in their structure, when pressed on the plane, one of the layers is pressed down, and the floor pattern begins to overflow, as if moving.

Selecting a modern tile with a volumetric structure for the wall surfaces of the bathroom, it is necessary to follow certain measures. Too large drawings visually transform the average-sized room into a cramped room. In addition, such dimensional images will make it very catchy, and after a while will become an annoying element of decor.

This type of veneer can be combined with simple finishing tiles. At the same time, it is necessary that all the details of the design of the walls and the floor be made in the same style and harmonize with each other.

3D-modification of ceramics is advised to put on a completely flat base. Even the smallest flaws in the surface can spoil the appearance of the design.

The main task is to avoid any damage to the top coating. This approach is especially required for wall cladding.

The image on this cover may not fade over the long term.

Volumetric version of the design of the walls and ceiling in the bathroom can be washed with water and wipe with a soft cloth before dry cleaning. During these processes it is forbidden to use even light detergents and powders, as they can wash away a special layer of the surface and reduce the optical manifestation of the pattern.

It leaves on the outer surface of carbon fiber stains that will be difficult to remove.

One of the possible means for cleaning such products are mixtures containing acids. But when interacting means with the outer layer may damage the decorating coating with a painted pattern. Therefore, the cleaning agent must be washed off immediately after application. The optimal solution is to choose special formulations intended for the care of such material.

The implementation in the bathroom of a unique design with the use of patterns in 3D is a modern innovation. The optical image on wall surfaces is original, catchy, tempting.

The variety of images allows the owner of the bathroom to convert the room into a kind of natural womb,Marine themes are especially popular: waves, shells, drawings of colorful exclusive fish and other living creatures of the underwater world. Such a design will surprise the most sophisticated guest.

Of course, most of the nuances depend on individual preferences. Visually expanding the space of the bathroom, making its design attractive is possible with simple tiles. The main thing is to understand how you want to make this room, outline the plan and choose a style. Then you need to choose the option of using bulk material.

All the properties of this lining are almost similar to those of a regular finishing tile, but the non-standard appearance of a 3D tile is the main prominent detail. A variety of patterns create the appearance of volumetric scope, depicted geometric shapes, vegetation, wildlife and much more are perceived as real objects and creatures.

The main purpose of such an exclusive, as with any other type of finish, is as follows:

• improve the type of bathroom, hiding the flaws of the room;
• perform the function of an accessible, easy-to-care facing for walls and floors.

Bright details of design and accessories on the contrary will only hide the spaciousness of the room. They are recommended to be used exclusively in the design of large spaces. In such a room you can realize the most daring ideas.

For masonry fashionable optical material does not need special skills. For installation, it is necessary to prepare the bulk tile itself, adhesive composition or tape, glued on both sides. You also need to trim and thoroughly clean the finished surface.

The product is fixed on special fixtures made of organic glass or polycarbonate. The gap between the tiles should be left gaps, which are then covered with a colorless silicone sealant.

Even taking into account the fact that volumetric ceramics has not yet managed to be recognized by many consumers, its use in design really gives an opportunity to create an original atmosphere that anyone will like.It is important to choose an option that will fit into the interior of the bathroom and will be in harmony with other interior details. With the help of such a coating it is possible to carry out the modeling of a special concept of the room design.

For a video review of tile options in 3D, see the video below.