Wallpaper Remover: which one to choose?

Wallpaper is a universal decorative material that is used for interior wall decoration. One of its drawbacks is the limited service life, which requires consistent replacement of the entire coating. Dismantling these canvases is not always easy.

To substantially accelerate and facilitate the process will help the means for removing the wallpaper. With their help, you can remove the canvas in a short time with minimal effort.

Specifications

Wallpaper strippers are used only for surfaces with which the glue has adhered very well. Today, there are many liquids with which you can solve a similar problem. These formulations are versatile and suitable for peeling off both paper and vinyl products.But if you used liquid crystal wallpaper, then remove them using solutions is impossible.

To do this, you will need to use special grinders and apply heating the surface of the walls to weaken the adhesion between materials.

Virtually all types of glue are made from organic ingredients. Therefore, to remove the old wallpaper from the walls, you should use substances that dissolve such mixtures. It should be noted that liquids for the removal of such materials are very similar in structure to ordinary detergents.

Therefore, many use the latter to prepare solvents at home.

Solvents consist of several components:

  • Antifoam.
  • Surfactant.

These compounds not only quickly dissolve the glue under the wallpaper, but also penetrate very well into the structure of the canvases themselves.

Several advantages of such liquids should be highlighted:

  • The mixtures are completely safe for human health, since they do not contain toxic components. But while chemicals here are still present, so they can eventually accumulate on the surface of the walls.
  • Preparation of the solution is a fairly simple procedure, since all the components readily dissolve in water.
  • Substances do not burn and do not melt, which eliminates the risk of accidental ignition.
  • Solutions are completely hypoallergenic, which allows them to be used in almost any room in the house.
  • Products practically does not interact with other finishing materials. But when using some species, it is still better to prevent them from getting on the surface of other substances.
  • Relatively low cost. Therefore, almost everybody can afford such a composition.
  • Lack of smell. These blends emit fragrances that are present in ordinary laundry detergent or detergent.

Wallpaper removal fluids may still differ in composition. Therefore, it is important to consider when choosing such products.

Application

Removing old wallpaper is only necessary for the purpose of replacing it with new models. Today the most common way to dismantle them is wetting.

This process can be described in several consecutive steps:

  • Initially preparing a solution. Its composition is selected, depending on the type of wallpaper.Often, manufacturers produce mixtures for both paper and non-woven materials. But for the latter option you will need to apply a liquid with a higher concentration of active substances. Therefore, before cooking, be sure to read the instructions, where the exact ratios of the water and the acquired composition are written.
  • So that the active substances quickly dissolve the glue need to make a few holes on the surface of the paper. This will allow the fluid to seep faster into the lower layers. Today, special gear rollers are used for such damage, which simply cut and tear the material of the wallpaper. But if this is not, then you can make a lot of holes with a regular knife.

The main thing is to just damage the top layer of the material to let the water in.

At this stage, you need to moisten the surface of the wallpaper. This can be done with a conventional brush or spray. The last option in life is very rare, as it is not always available.

So that the mixture does not fall on the finish and other products, they must be closed or removed from the room.

  • The procedure ends with the removal of sheets. Please note that this should be done only after a certain time after wetting. Otherwise, you can remove only those pieces that have been moistened, leaving dry segments on the wall. It is best to do this with a spatula or a knife, which simply should pry the corners and remove the paper with your hands.

If the sheets are torn apart, then after removing the piece, you need to try again wet the paper and leave. To not wait, you can simply remove the wallpaper from other parts of the wall.

The algorithm described earlier is suitable for almost all types of wallpaper and surfaces. If the products are glued on drywall, then you should very carefully wet it. This is necessary in order not to damage the paper frame, which keeps the sheet in one piece.

If there are special wallpaper on the walls for painting or materials that are glued to the bustilat, then it is almost impossible to remove them with the help of mortars. To do this, use either heating or mechanical grinding of the wall, which requires considerable effort and time. But such approaches today are quite rare, since everyone is trying to use only safe adhesives for installation work.

How to choose?

The compositions for removing wallpaper today are very widespread, which led to the emergence of many of their varieties. But almost all of them consist of similar components, which are simply mixed in different concentrations. When choosing means it is important to pay attention not only to what wallpaper they are intended for, but also to their manufacturer.

Ready Purchased

Manufacturers of wallpaper today offer several types of compositions for their removal.

The use of such products has several advantages:

  • The composition of the mixture is fully suitable for a certain type of glue and materials. This eliminates the risk that it will not work, as in the example with homemade solutions.
  • The preparation of the liquid takes only a few minutes, which allows to speed up the repair work.

There are several types of such products on the market, among which there are several brands:

  • Methylan (Metylan). Products of the German company Henkel is the most popular in the domestic market. Differs in reliability and high-quality interaction with all types of wall-paper.
  • Axton. The main component here is a non-ionic surfactant located in the aqueous phase. After applying the rest of the mixture can not be washed off.
  • Quelyd. The products of the French company allows you to work not only with different types of wallpaper, but even with several of their layers. The mixture is characterized by low consumption and high efficiency.
  • Kleo and many other means.

But the popularity of products leads to the appearance on the market of many fakes and cheap analogues. Therefore, experts recommend buying such products only in trusted outlets. As for manufacturers, only customer reviews are the best indicator of quality.

Therefore, try to pay attention to them so that you will not be deceived and not slipped the usual soapy water.

Cooking your own hands

Wallpaper mixes are not distinguished by a complex component structure. Virtually all formulations include plain water and several chemical solvents. Today, craftsmen are preparing such mixtures at home.

There are many recipes, among which there are several basic ones:

  • For the solution will need vinegar and warm water. Dilute the components should be in the plate a few basic: 1: 8 rotations, respectively. When the mixture is obtained, it can be safely applied to the surface of the wallpaper.
  • Hot water and fabric softener. The percentage ratio of the components should be approximately 2 to 1. After that, the resulting solution should be applied with a spray bottle to the wallpaper. Before dismantling it is advisable to wait about 20-25 minutes.
  • Washing powder and hot water. For one serving, you will need 1 kg of the mixture and 10 liters of liquid. Before processing, you need to mix the components. It is important here that the powder is completely dissolved. After that, using a spray gun or a sponge, apply the mixture to the wallpaper.

Please note that if you apply the solutions with a regular brush, then you need to adhere to the safety rules. This is especially important when using hot water, which can easily damage the skin.

When using folk methods, experts recommend to follow a few simple recommendations:

  • It is necessary to prepare solutions only with the help of pure water that does not contain other impurities.
  • Wallpaper after this is better to remove with a spatula.
  • When the walls are cleaned, then be sure to wash off the remnants of the solution and the powder that it contained.

General conclusions

Wallpaper strippers are one of the options for quickly dismantling them.But it should be understood that many types of paper-based material can easily be removed even with ordinary water and a scraper.

Therefore, before you purchase specialized tools, you should try whether it can be done without additional costs.

But if the surface of the wall is characterized by high-quality adhesion with wallpaper, then special solvents are the best solution for their removal. But it is important to consider not only the structure and composition of the wallpaper, but also the type of base on which they are glued. Therefore, after analyzing all the parameters, you can choose quality products that can cope with almost any kind of wallpaper.

In more detail about what means will help to quickly remove the old wallpaper, tell the following video.

Comments
 Author
Information provided for reference purposes. For construction issues, always consult a specialist.

Entrance hall

Living room

Bedroom