Choosing glue for non-woven wallpaper

Many who have made repairs themselves, know that under a certain wallpaper covering, you need to choose a special glue suitable for this material. In addition, you need to know some of the features of applying the adhesive mixture, for example, directly on the wall or only on wallpaper. For most people, pasting a room turns into a torment, which consumes a lot of strength and nerves. So that your works are not in vain and the result is a pleasure, let us examine in more detail the issue of the choice of glue and the correctness of its use in repair work with non-woven wallpaper.

At the moment, non-woven wallpaper are one of the popular means of decorating walls. This is primarily due to the fact that they are much stronger in their structure than many of their fellows.The composition of this type of coating includes textile and fabric fibers, which are bonded to each other, and then pressed with a special chemical composition, which gives special strength to the material. In the market you can find several types of non-woven wallpaper:

• 100% non-woven;
• on a flizelinovy ​​basis;
• non-woven wallpaper for painting.

Each of these types has certain features, so the final choice is always behind the buyer, based on his basic needs. So, fully non-woven wallpaper have a very dense texture, therefore, require the application of glue and on their surface, and on the walls. In addition, this material does not lose its appearance even under constant exposure to direct sunlight, does not soak and does not shrink.

In non-woven base wallpapers, as a rule, the top layer, namely, sputtering (or the drawing itself) can be from any material: paper, textile, vinyl, and so on. Of course, this type of coating makes it possible to obtain multifaceted textures and various effects on wallpaper. But the choice of these wallpapers should be approached thoroughly, since the quality of the material used in the production, all the more wear-resistant in the end will cover. Most of the glue on this type of wallpaper is applied directly to the wall, which greatly simplifies the repair work.

Non-woven wallpapers for painting are also very popular, as they allow you to repaint the walls up to ten times, without changing the floor. This is a huge plus, since you can change the color you are tired of without much effort. In addition, these wallpapers have a dense texture and allow you to cover the existing damage to the walls, as well as such a coating has additional sound and heat insulation, resistance to sunlight.

In addition to excellent density and wear resistance, please note that non-woven wallpapers have such characteristics as:

• excellent fire resistance, especially for fully non-woven materials;
• good air circulation due to the pressed structure;
• do not accumulate dust, so are great for people suffering from asthma or allergies.But this characteristic applies only to bezrelefnym coatings!
• most wallpaper materials are moisture resistant;
• do not fade in the sun and retain their original appearance for a long time;
• easy dismantling process.

But it should also highlight some of the disadvantages of this coating:

• the relief structure is easily damaged and can accumulate dust, which requires additional cleaning;
• purchasing material for painting, you need to spend money to buy the paint itself;
• One of the drawbacks of such a wallpaper is the price, it is higher than paper and vinyl counterparts, but the quality and additional advantages of non-woven fabric undoubtedly benefit.

When you have decided on the choice of non-woven coating, it is necessary to choose the right glue, since the final result of pasting the room directly depends on its quality. Today there are a lot of manufacturers that produce adhesive mixtures. Of course, for the buyer, the main criteria are:

• quality products;
• quick preparation and application;
• quick drying without a trace.

But besides these criteria, it is also necessary to pay attention to the composition of the adhesive,which includes substances capable of providing reliable adhesion of wallpaper to the wall (PVA glue and glue base), as well as special additives resistant to the formation and spread of fungus and mold (fungicide and bactericide).

Among the main types of adhesive base for wallpaper emit:

• special - they need to be chosen based on the types of wallpaper: paper, non-woven, vinyl, glass wall, cork, and so on;
• universal - they add special substances that enhance the adhesive factors of the adhesive. They are used for various types of coatings.

If you still choose among these types, it is better to give preference to special ones, since the manufacturer produces glue for a certain type of wallpaper and you can be sure of the final result, while universal adhesives can still let you down in repair work and have to spend again for the purchase of a better glue base.

One of the main criteria for selecting an adhesive is its adhesion, that is, the strength of adhesion and the ability to bond with other materials. As a rule, manufacturers do not indicate this indicator on the packaging. Therefore, to determine the increased adhesiveness, need to pay attention to the presence in the composition of the gelva. Only this component is able to enhance the adhesion of the wallpaper to the wall.

In addition, it is worth choosing adhesive materials of famous brands, which are especially popular among most buyers. It should be noted that some brands have a manifesting indicator, usually pink or blue (after drying it becomes colorless). With it, you can easily see the areas that are not applied to the glue, and thereby prevent further lag of wallpaper from the wall. This indicator is ideal for beginners in sticking wallpaper, as it will greatly facilitate their work.

Also, when choosing, you must be guided by the level of glue consumption (this information is always available on the package). The manufacturer specifies the size of the area, which is enough for one pack of glue, as well as what consistency it should be when diluted and how quickly it dries.Often when sticking non-woven wallpaper enough adhesive coating only on the wall. Since the material itself is heavy, it is easier to stick it on an already prepared surface.

In order for you to get a homogeneous solution without lumps, you must follow the instructions specified by the manufacturer on the package. Glue must be diluted in a clean, deep enough container. For this is quite suitable for a household bucket or pan. Please note that the water should be slightly warm (not cold and not hot).

Before adding the dry mixture, you must stir the water so that to form a funnel in the center. And only then you need to gradually add powder, stirring constantly, so as not to form lumps. If, however, lumps could not be avoided, strain the mixture through a sieve. The finished glue should be left for 10-20 minutes, so that the mixture swelled and acquired the necessary properties for high-quality work.

Glue mass must be sufficiently dense. Thickness directly depends on the wallpaper covering - the heavier it is, the thicker the adhesive material should be. Do not use highly diluted glue for non-woven wallpapers, as this coating will not be able to hold heavy material on the wall. The adhesive mixture can be applied to the wall with a roller, thick brush or brush. If the layer is applied more dense, then it will simultaneously perform the function of priming the surface.

Ready glue is better to use immediately., but if for some reason it is impossible, then close the container with the mixture with a lid or tie it with polyethylene. In this case, dust, random debris, etc. will not get into the mass. You can store diluted glue for seven to ten days, after which it will simply lose its properties.

We present to your attention the most popular and best types of glue for non-woven wallpaper from various manufacturers.

Quelyd "Special non-woven" - one of the highest quality and most popular adhesives for non-woven wallpapers.It is applied directly on the wall, has a high adhesive ability. Thanks to its ability to slip, the wallpaper material provides an easy sticking to the joint. Mass contains bactericidal and antifungal additives. It should also be noted that the manufacturer Quelyd always uses materials that are safe for humans and the environment. Therefore, you can safely buy it without fear for the health of your loved ones.

Most buyers say with confidence that this glue is easy to use. In addition, a significant advantage of this material is its efficiency (one pack is enough for more than four standard rolls), which will greatly affect your budget.

Metylan "Flizelin" - Another one of the popular materials for pasting the room. It is applied directly to the wall, has high adhesive qualities, is compatible with lime and cement. Separately, it is worth noting that the adhesive is resistant to temperature extremes and has antifungal protection.German manufacturer Methylan guarantees the safety and environmental friendliness of the material.

Among the downsides, many consumers point to the uneconomical glue - one pack is enough for about 3 standard rolls. Also ready-made solution has a slight soapy smell. But the tool did an excellent job with the main functions: it is convenient to work with glue on various surfaces, therefore, most buyers are satisfied with their choice.

"Moment Flizelin" - high-quality glue with excellent adhesive qualities. In the composition there are special anti-fungal additives. The mixture is easily applied directly to the wall with the ability to adjust the joints of the paintings during gluing. The manufacturer guarantees the safety and environmental friendliness of the material.

Buyers emphasize the cost-effectiveness of this material (enough for 5-6 standard rolls), the lack of smell and excellent adhesive ability. It shows its qualities well on almost any surface, and there are also no stains on the wallpaper when pasting the room.

Among other brands that are popular with buyers, it is also worth noting:

• Kleo "Extra" - excellent glue with antifungal additives, eco-friendly, non-toxic. A separate plus deserves the fact that it practically does not form lumps in the cooking process. The mixture is convenient to apply, does not leave marks on the canvases. Among the downsides, buyers point to an inflated price and the need for additional sizing of the joints. But for the most part, consumers note that the glue copes with all the properties declared by manufacturers. In addition, it is economically consumed and dries quickly.
• Pufas "Vlies" - good product with excellent adhesive properties. Separately, it should be noted that this adhesive has a blue indicator to control the application of the mixture. It has high moisture resistance, dries quickly and leaves no residue. Consumers say that the mixture has a slight smell. Among the downsides, there is also an overpriced and uneconomical use (enough for about 3 standard rolls). In principle, buyers indicate that the glue copes with all the declared functions, but with the same characteristics it is possible to find a cheaper means.

Summing up, we can say that the choice of material for repair work depends only on you and your needs. In any case, you need to choose a glue specifically designed for non-woven wallpaper, so that later you do not have to redo your work. And also be sure to follow all the recommendations of the manufacturer, indicated on the packaging, then the final result will not disappoint you.

Learn more about how to choose glue for non-woven wallpaper, you will learn from the following video.