Primer Ceresit: the pros and cons

The primer is one of the most important and necessary finishing materials. Despite the fact that it is always hidden under the layer of the finishing coating, the quality of all finishing works and their final appearance will depend on its quality. The greatest demand today is the primer Ceresit. We will talk about it in our article.

Ceresit primer is characterized by ultra-high permeability and ideally strong adhesion not only with the base of the working surface, but also with the upper decorative layer. Therefore, it not only fixes them separately, but also securely connects and holds together.

A competent approach of the manufacturer to the manufacture of primers allows us to provide them with additional special and important qualities. For example, there are primers with anti-corrosion functions or with the ability to suppress harmful microorganisms.

Using a primer Ceresit, you can simultaneously solve several problems at once: leveling the surface, improving its adhesion, blocking the pores on the working surface and giving it an attractive appearance. The achievement of these goals is possible due to the unique and well-thought-out composition.

Also, due to the leveling of the surface, the absorption of the working area of ​​finishing materials is reduced. That is why all its parts are uniformly stained in the future, and have the same color.

We can safely say that without a primer, it is simply impossible to perform high-quality finishing works. And in order to accurately achieve the best result, the manufacturer offers today several types of this coating.

The collection of primers Ceresit includes several varieties, each of which has unique characteristics. Each type of primer is attached a special instruction, compliance with which is the key to successful work.

• CT 17 Concentrate - It is a universal concentrated primer that can be used inside and outside the premises.Ideal for deep impregnation of any surface with a fragile base. The optimum ambient temperature during operation is 5 to 35 degrees above zero. The maximum permissible humidity is 80%.

• "Betonkontakt ST 19" has a water-dispersed basis, has good moisture resistance. Due to the fact that "Betonokontakt" has sand in its composition, its surface is slightly rough and improves adhesion of the primer with a finishing finish. This quartz impregnation is suitable for interior work, intended for application to concrete before plastering, puttying or painting.
• "IN 10 Ground Interior" - it is anti-fungal impregnation for interior work. She can handle walls and ceilings before pasting, painting, as well as puttying or plastering. For laying on top of the tile this primer is not suitable.

• Ceresit CT 17 - it is a universal impregnation with deep penetration. Suitable for exterior and interior use. It is realized in two types with the marking “winter” or “summer”, which indicates for which particular time of year this primer mixture is suitable.Most often used for floor screed. The use of such a primer requires the prior use of a degreaser.
• Ceresit R 777 - This is a special mixture designed for surfaces with a high level of absorption. It not only reduces this indicator, but also strengthens the base and improves the spreading of other mixtures. It is environmentally friendly, suitable for treating the floor before its screed. It can only be used indoors, resistant to low temperatures and does not lose its properties when it freezes.

• ST 99 it is used not only to eliminate the existing fungus on any surfaces, but also to prevent its further appearance and growth. This primer has fungistatic properties, has a specific aroma, which quickly disappears. It is safe for humans and the environment, leaves no traces on the work surface after soaking. Before use requires dilution with water in accordance with the instructions.
• ST 16 - it is a special quartz primer mixture, which is applied to surfaces to be further plastered.It goes on sale in white color, which can be changed by the consumer at will by using different colors. After drying, the surface becomes slightly rough due to the presence of sand in the composition. It can be used on any surfaces, with the exception of ceramic plates and bases having an oily top layer.

In order for the planned finishing works to be performed correctly, reliably and efficiently, it is necessary to remember that:

• It is necessary to choose a primer based on the material of the working area.
• If the work will be carried out outside the building, it is necessary to indicate on the package that the primer mixture is moisture resistant.
• Before buying, you need to examine all available types of primer and assess the volume and complexity of the upcoming work. Only after analyzing the information obtained, you can make a choice in favor of a particular product.

• If the primer is applied to an already plastered surface, you must first check its porosity. To do this, wet a small portion of the surface with water and note the time it dries. If it is less than 3 minutes, then it is necessary to acquire a special reinforcing primer mixture.
• It is necessary to take into account not only the material for manufacturing the working area, but also further actions with a primed surface. If the primer is not intended for further painting, then it cannot be used for painting surfaces.

• Under the wallpaper it is better to choose the tool in white with a maximum level of absorption.
• Compounds cannot be used in the cold season at sub-zero temperatures, unless the manufacturer has indicated the information on such a possibility.
• It is not recommended to use a primer mixture intended for the treatment of linen and walls when working with the floor and vice versa.

The manufacturer itself positions all its primers as one of the best available on the market today.The objectivity of such an assessment can be assessed by hearing the feedback from the buyers themselves.

Ceresit is a fairly popular brand, which is in demand among both professional decorators and ordinary citizens. Ordinary buyers in general, positively evaluate these products. The main advantages are the affordable price, a fairly wide range, ease of use. For many customers, an important point is the possibility of choosing a primer that will help solve some specific problems, such as mold and fungi.

Professional masters of finishing work generally support laudatory reviews. They emphasize the high quality of the primer of this brand, its economical consumption and full compliance with the stated functions. This means that if the manufacturer indicated that the primer aligns the color of the working area, then in fact it will. Professionals consider as a big plus that you can choose a primer mixture for any material and for performing any further finishing work. This allows you to always be confident in the high quality of the activities.

If you believe these reviews, then the primer Ceresit of all varieties today is really one of the best. The main thing is to choose the right mixture and use it correctly.

To achieve maximum efficiency from the use of this tool you need to know how to use it correctly.

You must perform the following steps:

• Clean the surface to be primed from any foreign objects. This includes remnants of old paint and wallpaper, dust, dirt and any foreign objects.
• The working area is additionally leveled. If the defects are too large, it is necessary to plaster the surface. If they are minor, then you can do a simple grout using a special grater.

• If on the surface there are traces of mold, mildew or incomprehensible damage, they must be cleaned manually or removed with a special compound.
• It is necessary to mix or shake the primer thoroughly. This will allow all active substances to be evenly distributed again throughout its volume.
• With the help of a roller on the handle or a wide paint brush, the primer is uniformly applied to the entire working surface in one layer.
• If the working area has an increased level of porosity, then after the first layer is completely dry, another one can be applied.
• It is allowed to put additional finishing coatings over a primer only after its full drying.

Compliance with such a simple but important sequence of actions will ensure a high-quality work result.

Before purchasing and using a primer directly, be sure to check the safety of the package and its shelf life. If they are broken, it is not recommended to use the mixture for work. The result of such actions may be unpredictable.

It is better to carry out all the preparatory stages for cleaning the working area a few hours before using a primer, and even better a day. Apply the mixture in three layers is not recommended. The second layer, if necessary, can be applied only after the first is completely dry, it will take about 20 hours.

All materials and tools used in the process of work should be immediately rinsed in warm water or soaked in it immediately after use. So remove from them the remnants of the primer will be much easier and faster.

Competent selection and use of Ceresit primer will allow you to qualitatively and fully prepare any work surface for further finishing work.

The result of the application of the primer Ceresit CT 17, see below in the video.